Vizio manual Remote Control Relays RY1 & RY2 on CCU-11B, SW-A-3 OFF, SW-A-3 on SW-B-2 OFF

7.REMOTE CONTROL RELAYS (RY1 & RY2) ON CCU-11B

Remark: Relay Control Capacity: 30VDC, 2A

Relays (RY1 & RY2) on CCU-11B are available for following functions.

Relay	DIP Switch Position	Functions and Operations
No.

SW-A-3 "OFF"

RY1

SW-A-3 "ON"

SW-B-2 "OFF"

RY2

SW-B-2 "ON"

ADoor Remote Control (One-shot-Make Relay Output)

Every master station can be used as a remote control device for door open-

ing. Touch dial	gives approximately 4 seconds make-contact for
the door opening.

BDoor Remote Control (Make-Break Relay Output)

Every master station can be used as a remote control device for door

opening.	Touch dial	gives continuous make-contact for door
opening.	Then touch dial	gives break-contact for door closing.

CPower ON/OFF Remote Control

When the system is used in conjunction with PA amplifier for the external

All-Call paging, the power switch of the PA amplifier can be turned on/off

with the relay built in the system. Touch dial gives the make-contact

together with the All-Call function until the function is canceled by dialing

(Remark: Touch dial gives break-contact of the relay.)

D Press To Talk Control

Touch dialing the specific station #17.

One way conversation is activated while the Press-To-Talk bar is continu- ously depressed, same as the Press-To-Talk (selected simplex) function, and the relay is activated with continuous make-contact.

One way conversation is reversed when the Press-To-Talk bar is released, and the relay is activated with break-contact.

— 8 —