Runco Reflection manual Ceiling Installation, Floor Installation

Installation

Proper placement of the projector relative to the screen will yield a rectangular, perfectly- centered image that completely fills the screen.

Ideally, the projector should be positioned perpendicular to the screen and in such a way that the lens center is aligned with either the top or bottom edge of the screen area, and centered horizontally.

The top of the projected image is even with the lens center when the projector is inverted (ceiling-mounted). Likewise, the bottom of the projected image is aligned with the lens center when the projector is upright (as in a floor installation).

➤

Vertical and Horizontal Position

Ceiling Installation

Height

x

Lens Center

Ceiling

Projection Distance

Lens Center

Screen

Floor Installation

Height

Lens Center

x

Screen

Lens Center

Projection Distance

Floor

If it is not possible to align the projector and screen as shown above, you can tilt the projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount. For a floor installation, turn the four adjustable feet on the bottom of the projector to adjust the projector height and/or projection angle.

If you do this, you may need to make keystone adjustments or vertically shift the image using the on-screen display (OSD) controls, to compensate. For detailed instructions, refer to On-Screen Display Menus, later in this manual.

➤

Adjusting the Projection Angle

Runco CL-610 Owner’s Operating Manual 21