Aspect Ratio Installation Option Setup

On-Screen Display Menus

The CL-610 has been designed to incorporate setup and calibration standards

established by the Imaging Science Foundation (ISF). The ISF has developed carefully ISF Calibration crafted, industry-recognized standards for optimal video performance and has

implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each and every input separately.

To access the ISF Calibration menu, use the up- or down-arrow keys to highlight ISF Calibration and press Enter. Use the number buttons on the remote control to enter the ISF Calibration menu passcode, then press Enter again.

NOTE: You only need to enter the ISF Calibration menu passcode the first time you select that menu after turning on the projector.

Runco CL-610

>Video S-Video Component1 Component2

RGB-HD

HDMI

------------------------

Aspect Ratio

Installation Option Setup

ISF Calibration

Passcode

Please Enter

Passcode To

Access ISF

Calibration

Screen

* * *

Passcode

Please Enter

Passcode To

Access ISF

Calibration

Screen

Confirmed

Reset Picture Adjust

Restore ISF Default.

Confirm?

No Yes

To restore the ISF default image settings for the current input source ONLY, press the ► arrow key to highlight “Yes” then press Enter.

These settings are described in the “Picture Quality Adjustments” section (refer to page 32).

These settings are described in the previous section, “Set Up.”

This setting is described in the “Installation” section (refer to page 35).

➤

Reset Picture Adjust

Picture Adjust

White Balance

Gamma Selection

Blue Image

Runco CL-610 Owner’s Operating Manual