Runco CL-610LT manual Kelvins Custom

On-Screen Display Menus

The CL-610 has six memory settings for Color Temperature. Four of these settings are factory set to default as follows:

0	-- Original lamp color temperature
1	-- 5400 kelvins	Color Temperature
2	-- 6500 kelvins	2 -	+
3	-- 8500 kelvins
4	-- Custom
5	-- Custom

➤

Color Temperature

Custom 4 and 5 memory are installer-adjustable and can be used to create custom settings. There are nine adjustable “white balance” parameters available for the Custom 4 and 5 settings (three each for red, green and blue). These are described later in this section; refer to “Set Up.”

NOTE: You must enter a passcode in order to enter the Set Up menu.

Use the ICC Selection menu to select the color space that is appropriate for the source signal, to achieve optimal color balance.

NOTE: The International Color Consortium (ICC) is a group of imaging product vendors that promotes and develops cross-platform, vendor-neutral color measurement and management standards.

If you select NTSC, HDTV or PAL, you can make further adjustments to individual color characteristics in the ICC Adjust sub-menu under the ISF Calibration menu, described later in this section. (The Standard color is factory-set and not adjustable.)

Once the desired adjustments have been entered, select Store Image Settings to save these settings into the “Memory 1” memory location.

To recall stored custom image quality settings, select Restore Image Settings and choose “Memory 1,” “ISF Night” or “ISF Day.”

➤

➤

➤

ICC Selection

Store Image Settings

Restore Image Settings

Runco CL-610 Owner’s Operating Manual 33