Runco CL-610LT manual Aspect Ratio, Standard 4 x

On-Screen Display Menus

Aspect Ratio

Runco CL-610

>Video S-Video

Component1

Component2

RGB-HD HDMI

------------------------

Aspect Ratio Installation Option Setup

ISF Calibration

Aspect Ratio

Anamorphic (16:9)

Standard (4:3)

Letterbox

Virtual Wide

Cinema

Virtual Cinema

To access the Aspect Ratio adjustments, press Menu, then press the ▲ or ▼ arrows to highlight Aspect Ratio and press Enter. The Aspect Ratio sub-menu then appears (see above).

There are six aspect ratios available that can be selected for video signal inputs:

• ANAMORPHIC (16:9)	• LETTERBOX
The image is compressed vertically,	The image in the Letterbox mode is
but anamorphic software will appear	stretched vertically, and the top and
properly proportioned. This is best	bottom portion ‘blanked off’. This ratio
suited for use with 16:9 DVDs and HDTV	is best suited for LaserDisc movies or
programming.	non-anamorphic DVDs.

Active Image Area Active Image Area

• STANDARD (4 x 3)	• VIRTUALWIDE
The input signal is scaled to fit in the	A 4:3 image is transformed into a 16x9
center of the 16:9 screen.	image.
Active
Image Area

34 Runco CL-610 Owner’s Operating Manual