Sharp PG-A10X operation manual Connecting the Projector to Other Devices, Before Connecting

Connecting the Projector to Other Devices

Before Connecting

Note

•Before connecting, be sure to turn off both the projector and the devices to be connected. After making all connections, turn on the projector and then the other devices.

When connecting a computer, be sure that it is the last device to be turned on after all the connections are made.

•Be sure to read the operation manuals of the devices to be connected before making connections.

This projector can be connected to:

A computer using:

■ An RGB cable and a ø3.5 mm audio cable (commercially available) (See page 16.)

■ A DIN-D-sub RS-232C adaptor and an RS-232C serial control cable (AN-C10RS) (sold separately) (See page 20.)

Component video or audio-visual equipment:

■ A VCR, Laser disc player or other audio-visual equipment (See page 18.)

■ A DVD player or DTV* decoder (See page 19.)

*DTV is the umbrella term used to describe the new digital television system in the United States.

Connections and Setup

Connecting the Power Cord

Plug the supplied power cord into the AC socket on the rear of the pro- jector.

Supplied	Power cord
accessory

-15