Sharp PG-A10X operation manual Connecting to Component Video Equip- ment, Cable

Page 23

Connecting to Component Video Equip- ment

Use a 3 RCA to 15-pin D-sub cable when con- necting to the INPUT 1 terminal, component video equipment such as DVD players and DTV* decoders.

*DTV is the umbrella term used to describe the new digital television system in the United States.

1 Connect the projector to the video equipment using the 3 RCA to 15-pin D-sub cable.

2 Connect the projector to the video equipment using a ø3.5

mmminijack to RCA audio cable (commercially available).

Note

When connecting the projector to the video equipment in this way, select “Component” for “Signal Type” in the “Picture” menu. See page 37.

A ø3.5 mm minijack to RCA audio cable (commercially available) is required for au- dio input.

Optional

3RCA to 15-pin D-sub cable

Type: AN-C3CP

cable

(9'10" (3.0 m))

 

To analog component output terminal

To audio output terminal

DVD player or

DTV* decoder

13 RCA to 15-pin D-sub cable (sold separately)

2ø3.5 mm minijack to RCA audio cable (commercially available)

Connections and Setup

-19

Image 23
Contents PG-A10X PG-A10S Model No Serial No Special Note for Users in the U.K Page Introduction Product Disposal When Attaching the Quick Guide LabelLight and Compact Design Outstanding FeaturesContents Appendix Power-Cord Protection CleaningAccessories Power SourcesWall or Ceiling Mounting Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with extremes of temperatureUsing the projector in other countries Temperature monitor functionFor Macintosh To install Acrobat Reader from the CD-ROMFor other operating systems For other languages For WindowsProjector Front and Top View Part NamesProjector Rear View Using the Kensington LockFORWARD/BACK buttons Remote Control Front ViewInserting the Batteries Using the Remote ControlWhen using the remote control Usable RangeOptional accessories AccessoriesSupplied accessories This projector can be connected to Connecting the Projector to Other DevicesBefore Connecting Connecting the Power CordFerrite core Connecting to a Computer Using the RGB CablePlug and Play function when connecting to a 15-pin terminal Connecting to Video Equipment Cable Connecting to Component Video Equip- mentControlling the Projector Using a Computer Using the Adjustment Feet SetupFocus ring Zoom knob Adjusting the LensStandard Setup Front Projection Setting up the ScreenScreen Size and Projection Distance Normal ModeStretch Mode Projection from behind the Screen Projecting a Reversed/Inverted ImagePower on button Volume buttons AV Mute button Input buttons Basic ProcedurePlug the power cord into the wall outlet Press on the projector or on the remote controlPress or on the remote control to adjust the volume Press , or on the remote control to select the IN- PUT modeSelecting the On-screen Display Language Keystone button Undo button Buttons Press , , \ and to adjust the Keystone correctionCorrecting Trapezoidal Distortion Main menu Sub menu Menu ItemsPAL-N Input 2 / 3 ModePress \or to display the other Using the Menu ScreenAdjustments Menu SelectionsPress \ or to adjust the item selected Press or to select the item you want to adjustButton Menu button Buttons SettingsMode is selected Press \or to display the other menu screensSub menu CLR Temp Adjusting Color Temperature Picture AdjustmentAdjusting the Image Memory Storing and Selecting Adjustment Settings Signal Type Signal TypeSRGB sRGB Setting SettingMode Settings Computer Image AdjustmentAdjusting the Computer Special Modes Special Image Example Fine Sync menu screen for Input 1 modeInput Signal Signal Info CheckingSwitching the Picture Dis- play Mode Picture Display ModeFunctions Enlarge Press to cancel the operationStill and Zoom Image Button ButtonsTaking the Keylock off Locking the Operation But- tonsIng the Lamp Life Status Screen Display Using the Options MenuLamp Timer Life Check OSD Display Setting On Background Selecting a Startup and Background Image Video System SettingEco Mode Setting the Eco Mode Video SystemMenu Screen Position Auto Power Off AutoPower Off Function Menu Position SelectingIf You Forget Your Pass- word Password Setting a Pass- wordAnti-TheftSetting the Anti-Theft Easy to Use Functions Reversing/Inverting Projected Images Setting the Projection ModeLens cap How to Use Carrying CaseCarrying the Projector Cleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensRemove the filter/lamp unit cover Cleaning and Replacing the Air FilterTurn off the power and discon- nect the power cord Replacing the Air FilterReplace the filter/lamp unit cover Clean the air filterTab User service screw Replace the air filterAbout the temperature warning indicator Maintenance IndicatorsMaintenance Indicators Replacing the Lamp Regarding the LampLamp Power OFF button AC socket User Service Screw Tab Removing and Installing the Lamp UnitPress on the projector to turn off the power Disconnect the power cordRemove the lamp unit Resetting the Lamp TimerConnect the power cord Reset the lamp timerRGB Input Component Input Connecting Pin AssignmentsCommunication conditions RS-232C Specifications and Command SettingsCommands PC controlComputer Computer Compatibility Chart16-20 TroubleshootingTroubleshooting For Sharp Assistance NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM SpecificationsUnits inches mm DimensionsAnti-Theft GlossaryBorder IndexSharp Corporation