Sharp PG-D40W3D quick start Turning the Projector On/Off

Page 30

Turning the Projector On/Off

Turning the Projector On

Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 21 to 25.)

Open the lens shutter fully and press STANDBY/ON on the projector or ON on the remote control.

•The power indicator illuminates green.

•After the lamp indicator illuminates, the projector is ready to start operation.

Note

•About the Lamp Indicator

The lamp indicator illuminates to indicate the status of the lamp.

Green: The lamp is on.

Blinking in green: The lamp is warming up.

Red: The lamp is shut down abnormally or the lamp should be replaced.

•When switching on the projector, a slight

fl ickering of the image may be experienced within the fi rst minute after the lamp has been illuminated. This is normal operation as the lamp's control circuitry is stabilising the lamp output characteristics. It should not be regarded as faulty operation.

•If the projector is put into standby mode and immediately turned on again, the lamp may take some time to start projection.

•When System Lock is set, the keycode input box appears. To cancel the keycode setting, input the keycode that you have already set. See page 46 for details.

Turning the Power Off (Putting the Projector into Standby Mode)

Press STANDBY/ON on the projector or STANDBY on the remote control, then press that button again while the confirmation message is displayed, to put the projector into standby mode.

• The projector cannot be turned on while cooling.

Info

•When “Auto Restart” is set to “On”:

If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. (See page 45.)

•English is the factory default language. If you want to change the on-screen display to another language, change the language according to the procedure on page 44.

Power indicator

STANDBY/ON button

Lamp indicator

STANDBY button

ON button

On-screen display (confirmation message)

Info

•Direct Power Off function:

You can unplug the power cord from the AC outlet even if the cooling fan is still running.

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Setup PG-D40W3DModel No Serial No Iii Page See bottom of projector Void the users authority to operate this equipmentInformation Product Disposal Maintenance Troubleshooting Index Using the Menu ScreenFor Future Reference Contents Setting up the Projector Network Environment Network Menu ReferenceAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Other connected equipment Using the projector in other countriesTemperature monitor function Closed Caption uses Bitstream Vera fontsWhen you want to view the Setup Manual For WindowsFor Macintosh Accessories Optional accessoriesTop View Part Names and FunctionsProjector Front ViewRear View Using the Carrying HandleUsing the Kensington Lock TerminalsFor switching Pointer Button MOUSE/AdjustmentAdjustment and setting Freeze buttonRemote control signal transmitters Inserting the BatteriesUsable Range Setup and Projection Quick StartInput list ControlSetting up the Projector Setting up the ProjectorVideo Setup Standard Setup Front ProjectionProjection Projection PRJ ModeExample 1610 Signal Input Normal Mode Picture Size DistanceSignal Input Normal Mode Screen Size and Projection DistanceConnecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer AC socket Power cord Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable SuppliedTurning the Projector On/Off Turning the Projector OnAdjusting the Picture Size Adjusting the Projected Image Adjusting the FocusAdjusting the Height Image ProjectionCorrecting Trapezoidal Distortion Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press KeystoneSwitching the Input Mode Adjusting the VolumeOn-screen display Resize Mode Press ResizeAbout Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Projector adjustment PRJ-ADJ menuItems you can set with the Help menu Network menuHelp menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Example Adjusting BrightPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Colors Adjusting the ImageAdjusting the Color Temperature Adjusting Hue, Saturation, or ValueProgressive Reducing Image Noise DNREco+Quiet Adjusting the Projected Image SCR ADJ Menu Reversing/Inverting Projected Images DLP LinkTM DLP LinkTM Invert Setting the Video SetupClosed Caption Selecting the Background ImageStandby Mode Auto Sync Auto Sync AdjustmentAuto Power Off Function Auto Restart FunctionFan Mode Setting Audio Output Type SettingSpeaker Setting Selecting the Transmission Speed RS-232CEnter the same keycode in Re Confirm When the System Lock is setChecking the Lamp Life Status Input screen for keycodeKeylock Function Locking the Operation ButtonsTaking the Keylock off Setting a Password TCP/IP Setting Setting up the Projector Network Environment Network MenuDhcp Client Setting Confirming the Projector InformationEnter button Adjustment buttons P/R/O/Q MENU/HELP button Troubleshooting with the Help MenuExample When image flickering appears Utilizing the Help Menu FunctionsCleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Remove the lamp unit coverLamp unit Resetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 Sharp Electronics Corporation Specifications PG-D40W3DDimensions Kensington Security Standard connector ·················13 Index
Related manuals
Manual 35 pages 351 b

PG-D40W3D specifications

The Sharp PG-D40W3D is a high-performance 3D projector designed to deliver exceptional visual experiences in both professional and entertainment settings. With its advanced technologies and robust features, the PG-D40W3D stands out as an ideal choice for educators, corporate environments, and event planners looking to create immersive presentations and captivating displays.

One of the key highlights of the Sharp PG-D40W3D is its impressive 4000 ANSI lumens brightness, ensuring clear and vibrant images even in well-lit environments. This high brightness level allows for optimal viewing experiences during daytime presentations or in rooms with ambient light, making it versatile for various applications. Coupled with a high contrast ratio, the projector reproduces deep blacks and bright whites, enhancing the overall image quality.

The PG-D40W3D also incorporates advanced 3D projection capabilities, utilizing DLP technology to create stunning three-dimensional visuals. This makes it an excellent tool for showcasing 3D models, architectural designs, or animated content, providing audiences with an engaging and interactive viewing experience. The ability to switch between 2D and 3D projection modes adds to its flexibility, allowing users to cater to different content types as needed.

With a native resolution of 1280 x 800 pixels (WXGA), the projector delivers sharp and detailed images, making it suitable for detailed presentations, graphs, and charts. The PG-D40W3D supports various input options, including HDMI and VGA, ensuring compatibility with a wide range of devices such as laptops, Blu-ray players, and gaming consoles.

Additionally, the projector features a customizable lens shift and zoom capabilities, allowing users to adjust the image's size and position without compromising on quality. This feature is beneficial in settings where the projector's placement is less than optimal, providing more flexibility in installation.

For ease of use, the PG-D40W3D comes equipped with an intuitive remote control and user-friendly on-screen menus, enabling quick adjustments and efficient navigation. The robust build quality and reliable performance make it a preferred choice for long-term usage, ensuring that it can withstand the rigors of frequent transport and installation.

In conclusion, the Sharp PG-D40W3D is a versatile and powerful 3D projector, ideal for delivering high-quality visual presentations in various environments. Its brightness, resolution, flexibility, and advanced projection technologies position it as a leading choice for professionals seeking to captivate their audience and elevate the quality of their presentations.
Top Page Image Contents