Sharp PG-D40W3D See bottom of projector, Void the users authority to operate this equipment

Page 5
U.S.A. ONLY
U.S.A. ONLY

Before using the projector, please read this operation manual carefully.

IntroductionENGLISH

There are two important reasons for prompt warranty registration of your new SHARP Projector, using the REGISTRATION CARD packed with the projector.

1.WARRANTY

This is to assure that you immediately receive the full benefit of the parts, service and labor warranty applicable to your purchase.

2.CONSUMER PRODUCT SAFETY ACT

To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.

WARNING: High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light.

WARNING: To reduce the risk of fi re or electric shock, do not expose this product to rain or moisture.

See bottom of projector.

The lightning fl ash with arrowhead sym-

CAUTION

bol, within an equilateral triangle, is in-

tended to alert the user to the presence

RISK OF ELECTRIC SHOCK.

of uninsulated “dangerous voltage”

DO NOT REMOVE SCREWS

within the product's enclosure that may

EXCEPT SPECIFIED USER

be of suffi cient magnitude to constitute

SERVICE SCREW.

a risk or electric shock to persons.

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

The exclamation point within a triangle

DO NOT REMOVE COVER.

is intended to alert the user to the pres-

NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.

ence of important operating and main-

REFER SERVICING TO QUALIFIED SERVICE

tenance (servicing) instructions in the

PERSONNEL.

literature accompanying the product.

 

WARNING:

 

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

WARNING: FCC Regulations state that any unauthorized changes or modifi cations to this equipment not expressly approved by the manufacturer could

void the user's authority to operate this equipment.

The enclosed computer cable must be used with the device. The cable is provided to ensure that the device complies with FCC Class A verifi cation.

U.S.A. ONLY

Introduction

1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PG-D40W3D SetupModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal For Future Reference Maintenance Troubleshooting IndexUsing the Menu Screen Contents Reference Setting up the Projector Network Environment Network MenuPower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Temperature monitor function Using the projector in other countriesOther connected equipment Closed Caption uses Bitstream Vera fontsFor Macintosh When you want to view the Setup ManualFor Windows Optional accessories AccessoriesProjector Part Names and FunctionsTop View Front ViewUsing the Kensington Lock Using the Carrying HandleRear View TerminalsAdjustment and setting Pointer Button MOUSE/AdjustmentFor switching Freeze buttonUsable Range Remote control signal transmittersInserting the Batteries Quick Start Setup and ProjectionControl Input listVideo Setup Setting up the ProjectorSetting up the Projector Standard Setup Front ProjectionExample 1610 Signal Input Normal Mode Picture Size Projection PRJ ModeProjection DistanceScreen Size and Projection Distance Signal Input Normal ModeYou may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket Power cord SuppliedTurning the Projector On Turning the Projector On/OffAdjusting the Height Adjusting the Projected Image Adjusting the FocusAdjusting the Picture Size Image ProjectionPress P/Q or O/R to adjust Keystone Correction Press Keystone to enter the Keystone Correction modeCorrecting Trapezoidal Distortion Press KeystoneOn-screen display Switching the Input ModeAdjusting the Volume Press Resize Resize ModeAbout Copyrights Displaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeSelecting the Picture Mode Auto Sync Auto Sync AdjustmentFreezing a Moving Image Displaying an Enlarged Portion of an ImageWhen moving the cursor Using the Remote Control as the Wireless Computer MouseWhen left-clicking When right-clickingPicture menu Menu ItemsProjector adjustment PRJ-ADJ menu Screen adjustment SCR-ADJ menuHelp menu Network menuItems you can set with the Help menu Help menu nMenu Selections Adjustments Using the Menu ScreenPress Q or O and select Picture to adjust Example Adjusting BrightPress P or R and select Bright to adjust To adjust the projected image while watching itPress O or Q to adjust the item selected Press EnterMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Color Temperature Adjusting the ImageAdjusting the Colors Adjusting Hue, Saturation, or ValueEco+Quiet ProgressiveReducing Image Noise DNR Adjusting the Projected Image SCR ADJ Menu Closed Caption DLP LinkTM DLP LinkTM Invert Setting the Video SetupReversing/Inverting Projected Images Selecting the Background ImageAuto Power Off Function Auto Sync Auto Sync AdjustmentStandby Mode Auto Restart FunctionSpeaker Setting Audio Output Type SettingFan Mode Setting Selecting the Transmission Speed RS-232CChecking the Lamp Life Status When the System Lock is setEnter the same keycode in Re Confirm Input screen for keycodeTaking the Keylock off Keylock FunctionLocking the Operation Buttons Setting a Password Dhcp Client Setting Setting up the Projector Network Environment Network MenuTCP/IP Setting Confirming the Projector InformationExample When image flickering appears Troubleshooting with the Help MenuEnter button Adjustment buttons P/R/O/Q MENU/HELP button Utilizing the Help Menu FunctionsCleaning the projector MaintenanceCleaning the lens Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Lamp unit Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Computer Computer Compatibility Chart21-25 Troubleshooting52, 53 Sharp Electronics Corporation PG-D40W3D SpecificationsDimensions Index Kensington Security Standard connector ·················13
Related manuals
Manual 35 pages 351 b

PG-D40W3D specifications

The Sharp PG-D40W3D is a high-performance 3D projector designed to deliver exceptional visual experiences in both professional and entertainment settings. With its advanced technologies and robust features, the PG-D40W3D stands out as an ideal choice for educators, corporate environments, and event planners looking to create immersive presentations and captivating displays.

One of the key highlights of the Sharp PG-D40W3D is its impressive 4000 ANSI lumens brightness, ensuring clear and vibrant images even in well-lit environments. This high brightness level allows for optimal viewing experiences during daytime presentations or in rooms with ambient light, making it versatile for various applications. Coupled with a high contrast ratio, the projector reproduces deep blacks and bright whites, enhancing the overall image quality.

The PG-D40W3D also incorporates advanced 3D projection capabilities, utilizing DLP technology to create stunning three-dimensional visuals. This makes it an excellent tool for showcasing 3D models, architectural designs, or animated content, providing audiences with an engaging and interactive viewing experience. The ability to switch between 2D and 3D projection modes adds to its flexibility, allowing users to cater to different content types as needed.

With a native resolution of 1280 x 800 pixels (WXGA), the projector delivers sharp and detailed images, making it suitable for detailed presentations, graphs, and charts. The PG-D40W3D supports various input options, including HDMI and VGA, ensuring compatibility with a wide range of devices such as laptops, Blu-ray players, and gaming consoles.

Additionally, the projector features a customizable lens shift and zoom capabilities, allowing users to adjust the image's size and position without compromising on quality. This feature is beneficial in settings where the projector's placement is less than optimal, providing more flexibility in installation.

For ease of use, the PG-D40W3D comes equipped with an intuitive remote control and user-friendly on-screen menus, enabling quick adjustments and efficient navigation. The robust build quality and reliable performance make it a preferred choice for long-term usage, ensuring that it can withstand the rigors of frequent transport and installation.

In conclusion, the Sharp PG-D40W3D is a versatile and powerful 3D projector, ideal for delivering high-quality visual presentations in various environments. Its brightness, resolution, flexibility, and advanced projection technologies position it as a leading choice for professionals seeking to captivate their audience and elevate the quality of their presentations.
Top Page Image Contents