Sharp PG-D40W3D quick start Maintenance Indicators, About the temperature warning indicator

Page 57

Maintenance Indicators

■The warning lights (power indicator, lamp indicator and temperature warning indicator) on the projector indicate problems inside the projector.

■If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter standby mode. After the projector has entered standby mode, follow the procedures given below.

Top View

Power indicator Lamp indicator

Temperature warning indicator

About the temperature warning indicator

If the temperature inside the projector increases, due to blockage of the air vents, or the setting location, the temperature warning indicator will blink. And if the temperature keeps on rising,

“” will illuminate in the lower left corner of the picture with the temperature warning indicator blinking. If this state continues, the lamp will turn off, the cooling fan will run and then the projector will enter standby mode. When you fi nd the temperature warning indicator blinking, be sure to perform the measures described on page 54.

About the lamp indicator

■When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will be displayed on the screen. When the percentage becomes 0%, it will change to (red), the lamp will automatically turn off and then the projector will automatically enter standby mode. At this time, the lamp indicator will illuminate in red.

■If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on.

Indicators on the Projector

 

 

Power indicator

Red on

Normal (Standby)

 

 

Green on

Normal (Power on)

 

 

Red blinks

Abnormal (See page 54.)

 

 

Green blinks

Normal (Cooling)

 

 

Green and orange

The lens shutter is closed. (See page 29.)

 

 

blink alternately

 

 

Lamp indicator

Green on

Normal

 

 

Green blinks

The lamp is warming up.

Appendix

 

Red on

The lamp is shut down abnormally or requires to be

 

 

changed. (See page 54.)

 

Temperature

Off

Normal

 

warning indicator

 

 

 

Red on/Red blinks

The internal temperature is abnormally high. (See page 54.)

 

53

Page 56 Page 58
Image 57
Page 56 Page 58
Contents PG-D40W3D SetupModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal Maintenance Troubleshooting Index Using the Menu ScreenFor Future Reference Contents Reference Setting up the Projector Network Environment Network MenuPower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOther connected equipment Closed Caption uses Bitstream Vera fontsWhen you want to view the Setup Manual For WindowsFor Macintosh Optional accessories AccessoriesProjector Part Names and FunctionsTop View Front ViewUsing the Kensington Lock Using the Carrying HandleRear View TerminalsAdjustment and setting Pointer Button MOUSE/AdjustmentFor switching Freeze buttonRemote control signal transmitters Inserting the BatteriesUsable Range Quick Start Setup and ProjectionControl Input listVideo Setup Setting up the ProjectorSetting up the Projector Standard Setup Front ProjectionExample 1610 Signal Input Normal Mode Picture Size Projection PRJ ModeProjection DistanceScreen Size and Projection Distance Signal Input Normal ModeYou may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket Power cord SuppliedTurning the Projector On Turning the Projector On/OffAdjusting the Height Adjusting the Projected Image Adjusting the FocusAdjusting the Picture Size Image ProjectionPress P/Q or O/R to adjust Keystone Correction Press Keystone to enter the Keystone Correction modeCorrecting Trapezoidal Distortion Press KeystoneSwitching the Input Mode Adjusting the VolumeOn-screen display Press Resize Resize ModeAbout Copyrights Displaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeSelecting the Picture Mode Auto Sync Auto Sync AdjustmentFreezing a Moving Image Displaying an Enlarged Portion of an ImageWhen moving the cursor Using the Remote Control as the Wireless Computer MouseWhen left-clicking When right-clickingPicture menu Menu ItemsProjector adjustment PRJ-ADJ menu Screen adjustment SCR-ADJ menuHelp menu Network menuItems you can set with the Help menu Help menu nMenu Selections Adjustments Using the Menu ScreenPress Q or O and select Picture to adjust Example Adjusting BrightPress P or R and select Bright to adjust To adjust the projected image while watching itPress O or Q to adjust the item selected Press EnterPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Color Temperature Adjusting the ImageAdjusting the Colors Adjusting Hue, Saturation, or ValueProgressive Reducing Image Noise DNREco+Quiet Adjusting the Projected Image SCR ADJ Menu Closed Caption DLP LinkTM DLP LinkTM Invert Setting the Video SetupReversing/Inverting Projected Images Selecting the Background ImageAuto Power Off Function Auto Sync Auto Sync AdjustmentStandby Mode Auto Restart FunctionSpeaker Setting Audio Output Type SettingFan Mode Setting Selecting the Transmission Speed RS-232CChecking the Lamp Life Status When the System Lock is setEnter the same keycode in Re Confirm Input screen for keycodeKeylock Function Locking the Operation ButtonsTaking the Keylock off Setting a Password Dhcp Client Setting Setting up the Projector Network Environment Network MenuTCP/IP Setting Confirming the Projector InformationExample When image flickering appears Troubleshooting with the Help MenuEnter button Adjustment buttons P/R/O/Q MENU/HELP button Utilizing the Help Menu FunctionsCleaning the projector MaintenanceCleaning the lens Cleaning the exhaust and intake ventsMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Remove the lamp unit coverLamp unit Resetting the Lamp Timer Computer Computer Compatibility Chart21-25 Troubleshooting52, 53 Sharp Electronics Corporation PG-D40W3D SpecificationsDimensions Index Kensington Security Standard connector ·················13
Related manuals
Manual 35 pages 351 b

PG-D40W3D specifications

The Sharp PG-D40W3D is a high-performance 3D projector designed to deliver exceptional visual experiences in both professional and entertainment settings. With its advanced technologies and robust features, the PG-D40W3D stands out as an ideal choice for educators, corporate environments, and event planners looking to create immersive presentations and captivating displays.

One of the key highlights of the Sharp PG-D40W3D is its impressive 4000 ANSI lumens brightness, ensuring clear and vibrant images even in well-lit environments. This high brightness level allows for optimal viewing experiences during daytime presentations or in rooms with ambient light, making it versatile for various applications. Coupled with a high contrast ratio, the projector reproduces deep blacks and bright whites, enhancing the overall image quality.

The PG-D40W3D also incorporates advanced 3D projection capabilities, utilizing DLP technology to create stunning three-dimensional visuals. This makes it an excellent tool for showcasing 3D models, architectural designs, or animated content, providing audiences with an engaging and interactive viewing experience. The ability to switch between 2D and 3D projection modes adds to its flexibility, allowing users to cater to different content types as needed.

With a native resolution of 1280 x 800 pixels (WXGA), the projector delivers sharp and detailed images, making it suitable for detailed presentations, graphs, and charts. The PG-D40W3D supports various input options, including HDMI and VGA, ensuring compatibility with a wide range of devices such as laptops, Blu-ray players, and gaming consoles.

Additionally, the projector features a customizable lens shift and zoom capabilities, allowing users to adjust the image's size and position without compromising on quality. This feature is beneficial in settings where the projector's placement is less than optimal, providing more flexibility in installation.

For ease of use, the PG-D40W3D comes equipped with an intuitive remote control and user-friendly on-screen menus, enabling quick adjustments and efficient navigation. The robust build quality and reliable performance make it a preferred choice for long-term usage, ensuring that it can withstand the rigors of frequent transport and installation.

In conclusion, the Sharp PG-D40W3D is a versatile and powerful 3D projector, ideal for delivering high-quality visual presentations in various environments. Its brightness, resolution, flexibility, and advanced projection technologies position it as a leading choice for professionals seeking to captivate their audience and elevate the quality of their presentations.
Top Page Image Contents