Sharp PG-D40W3D quick start Troubleshooting with the Help Menu, Utilizing the Help Menu Functions

Page 55

Troubleshooting with the “Help” Menu

This function advises you to solve the problems during usage.

Utilizing the “Help” Menu Functions

Example: When image flickering appears

Operation to solve image fl ickering when projecting the computer RGB signal.

1 Press MENU/HELP.

2 Press O or Q to select “Help”, then press ENTER.

3 Press P or R to select “Vertical stripes or flickering image appears” on Help menu, then press ENTER.

Pict.

SCR

PRJ

Net.

Help

There is no picture or audio

Vertical stripes or flickering image appear

Data image is not centered

Color is faded or poor

Picture is dark

The image is distorted

It is difficult to hear audio

Set up HDMI CEC function

Reset all adjustments to default settings

SEL.

ENTER

END

Press ENTER.

Help

Vertical stripes or flickering image appear

Initiate “Auto Sync” Adjustments.

If there is no change after performing "Auto Sync" adjustments, adjust the following items.

Adjust vertical noise

Adjust horizontal noise

Reset the 2 items above

Return

Signal Info 1024 768

 

H

48.3 kHz / V 59.9 Hz

 

 

 

 

SEL.

ENTER

END

ENTER button

Adjustment buttons (P/R/O/Q)

MENU/HELP button

4 Select “Initiate “Auto Sync” Adjustments”, then press ENTER.

5 If the image is not improved, select “Adjust horizontal noise”, then press ENTER.

6 Press O or Q to adjust.

Help

 

Phase

0

 

 

 

 

 

 

 

 

 

 

SEL./ADJ.

Rtn. Menu

 

 

END

 

Note

•You can adjust the items with check marks (✔).

•The items in the “Help” menu change, depending on the input signal or setting that you have selected.

•If the problem is not solved, refer to “Troubleshooting” (see pages 59 and 60).

•When selecting “sRGB” in “Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types.

Features

Useful

51

Page 54 Page 56
Image 55
Page 54 Page 56
Contents PG-D40W3D SetupModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal Using the Menu Screen Maintenance Troubleshooting IndexFor Future Reference Contents Reference Setting up the Projector Network Environment Network MenuPower-Cord Protection CleaningPower Sources AccessoriesOverloading Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Closed Caption uses Bitstream Vera fonts Using the projector in other countriesTemperature monitor function Other connected equipmentFor Windows When you want to view the Setup ManualFor Macintosh Optional accessories AccessoriesFront View Part Names and FunctionsProjector Top ViewTerminals Using the Carrying HandleUsing the Kensington Lock Rear ViewFreeze button Pointer Button MOUSE/AdjustmentAdjustment and setting For switchingInserting the Batteries Remote control signal transmittersUsable Range Quick Start Setup and ProjectionControl Input listStandard Setup Front Projection Setting up the ProjectorVideo Setup Setting up the ProjectorDistance Projection PRJ ModeExample 1610 Signal Input Normal Mode Picture Size ProjectionScreen Size and Projection Distance Signal Input Normal ModeYou may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer Supplied Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable AC socket Power cordTurning the Projector On Turning the Projector On/OffImage Projection Adjusting the Projected Image Adjusting the FocusAdjusting the Height Adjusting the Picture SizePress Keystone Press Keystone to enter the Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Correcting Trapezoidal DistortionAdjusting the Volume Switching the Input ModeOn-screen display Press Resize Resize ModeAbout Copyrights Switching the Eco+Quiet Mode Operating with the Remote ControlDisplaying and Setting the Break Timer Using the Spot FunctionDisplaying an Enlarged Portion of an Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Freezing a Moving ImageWhen right-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When left-clickingPicture menu Menu ItemsProjector adjustment PRJ-ADJ menu Screen adjustment SCR-ADJ menuHelp menu n Network menuHelp menu Items you can set with the Help menuExample Adjusting Bright Using the Menu ScreenMenu Selections Adjustments Press Q or O and select Picture to adjustPress Enter To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedSelecting the Picture Mode Picture Adjustment Picture MenuMenu operation n Adjusting Hue, Saturation, or Value Adjusting the ImageAdjusting the Color Temperature Adjusting the ColorsReducing Image Noise DNR ProgressiveEco+Quiet Adjusting the Projected Image SCR ADJ Menu Selecting the Background Image DLP LinkTM DLP LinkTM Invert Setting the Video SetupClosed Caption Reversing/Inverting Projected ImagesAuto Restart Function Auto Sync Auto Sync AdjustmentAuto Power Off Function Standby ModeSelecting the Transmission Speed RS-232C Audio Output Type SettingSpeaker Setting Fan Mode SettingInput screen for keycode When the System Lock is setChecking the Lamp Life Status Enter the same keycode in Re ConfirmLocking the Operation Buttons Keylock FunctionTaking the Keylock off Setting a Password Confirming the Projector Information Setting up the Projector Network Environment Network MenuDhcp Client Setting TCP/IP SettingUtilizing the Help Menu Functions Troubleshooting with the Help MenuExample When image flickering appears Enter button Adjustment buttons P/R/O/Q MENU/HELP buttonCleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Lamp Regarding the LampReplacing the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitLamp unit Resetting the Lamp Timer Computer Computer Compatibility Chart21-25 Troubleshooting52, 53 Sharp Electronics Corporation PG-D40W3D SpecificationsDimensions Index Kensington Security Standard connector ·················13
Related manuals
Manual 35 pages 351 b

PG-D40W3D specifications

The Sharp PG-D40W3D is a high-performance 3D projector designed to deliver exceptional visual experiences in both professional and entertainment settings. With its advanced technologies and robust features, the PG-D40W3D stands out as an ideal choice for educators, corporate environments, and event planners looking to create immersive presentations and captivating displays.

One of the key highlights of the Sharp PG-D40W3D is its impressive 4000 ANSI lumens brightness, ensuring clear and vibrant images even in well-lit environments. This high brightness level allows for optimal viewing experiences during daytime presentations or in rooms with ambient light, making it versatile for various applications. Coupled with a high contrast ratio, the projector reproduces deep blacks and bright whites, enhancing the overall image quality.

The PG-D40W3D also incorporates advanced 3D projection capabilities, utilizing DLP technology to create stunning three-dimensional visuals. This makes it an excellent tool for showcasing 3D models, architectural designs, or animated content, providing audiences with an engaging and interactive viewing experience. The ability to switch between 2D and 3D projection modes adds to its flexibility, allowing users to cater to different content types as needed.

With a native resolution of 1280 x 800 pixels (WXGA), the projector delivers sharp and detailed images, making it suitable for detailed presentations, graphs, and charts. The PG-D40W3D supports various input options, including HDMI and VGA, ensuring compatibility with a wide range of devices such as laptops, Blu-ray players, and gaming consoles.

Additionally, the projector features a customizable lens shift and zoom capabilities, allowing users to adjust the image's size and position without compromising on quality. This feature is beneficial in settings where the projector's placement is less than optimal, providing more flexibility in installation.

For ease of use, the PG-D40W3D comes equipped with an intuitive remote control and user-friendly on-screen menus, enabling quick adjustments and efficient navigation. The robust build quality and reliable performance make it a preferred choice for long-term usage, ensuring that it can withstand the rigors of frequent transport and installation.

In conclusion, the Sharp PG-D40W3D is a versatile and powerful 3D projector, ideal for delivering high-quality visual presentations in various environments. Its brightness, resolution, flexibility, and advanced projection technologies position it as a leading choice for professionals seeking to captivate their audience and elevate the quality of their presentations.
Top Page Image Contents