Sim2 Multimedia ProC3 Introduction, Connections, Remote Control, On Screen Menu

PROC3

1 INTRODUCTION

The Pro-C3 projector represents the state of the art in image processing combined with the innovative DLP™ sytsem and outstanding optics.

Its range of inputs (1 Composite Video input, 1 S-Video input, 1 Com- ponents or RGB input, 1 graphic RGB input, 2 HDMI™ inputs) allow it to be connected to a wide range of analogue and digital sources: DVD players, video recorders, satellite and terrestrial receivers, computers, video game consoles, camcorders, etc.

Its image processing system allows optimum reproduction of a wide range of input signals, from interlaced video to high definition and digital graphics.

Faithful reproduction of signals at higher resolutions (such as high definition video and graphics) occurs without loss of information or reduction of image sharpness thanks to the processor’s high pixel rate signal acquisition capabilities.

Different input signal resolutions can be adapted to match the specified screen resolution without loss of image quality, thanks to a generous selection of preset aspect ratios, some of which are user definable.

All picture adjustments can be made with the remote control interac- ting with a simple menu-activated On Screen Display; alternatively, the projector can be controlled by a domestic automation system via its serial port.

The appliance has been subjected to exhaustive operating tests by SIM2 to ensure maximum quality.

The projector bulb life should thus initially be around 30-60 hours. Besides the usual checks, the Quality Control department also runs additional statistical tests before despatch.

In this instance the packaging may show signs of having been opened, and the hours operation of the lamp may be higher than the value required under standard procedures.

CONTENTS
1	INTRODUCTION	2	10	CLEANING AND MAINTENANCE	26
2	IMPORTANT SAFETY INSTRUCTIONS	3
			11	PRODUCT DISPOSAL	26
3	UNPACKING	7
			12	TROUBLESHOOTING GUIDE	27
4	PRODUCT OVERVIEW	8
			13	OPTIONAL ACCESSORIES	28
5	INSTALLATION	10
			14 SERIAL ENTERFACE AND EASY CINEMA		28
6	SWITCHING THE PROJECTOR ON AND OFF	12
				Technical specifications	29
7	CONNECTIONS	13
				On Screen Menu Layout	30
8	REMOTE CONTROL	16
				Dimensions	32
9	ON SCREEN MENU	17
				Projection distance	33
				Resolutions	37
		manual version 2.3 (18-04-2007)
			DLP and DMD are registered trademarks of Texas Instruments.
			HDMI, the HDMI logo and the expression High-Definition Multimedia Interface
			are trade marks or registered marks of HDMI licensing LLC