PROC3
Graphic image with poor quality vertical detail
•Check compatibility of the video or graphic signals with the technical specifications of the system, and specifically, with the specifications of the selected input.
•Press key “A” on the remote control or ◀ on the projector’s keypad to execute automatic adjustments.
•Adjust the Frequency and Phase settings in the IMAGE menu to optimize the vertical details of the image(if available for the input in question).
Video Image showing colour misalignment on vertical de- tails
•Check compatibility of the video or graphic signals with the technical specifications of the system, and specifically, with the specifications of the selected input.
•Adjust Y/C Delay settings in the IMAGE menu to reduce colour misalignment.
Remote control does not work
•Check remote control battery power and correct polari- ty.
•Ensure the area between the infrared sensors (on the front panel of the projector) and the remote control is free from obstructions.
•Make sure the infrared sensors on the front and rear of the projector are not exposed to intense light levels.
13 OPTIONAL ACCESSORIES
You can purchase the following optional accessories at your Dealer:
-Ceiling mount kit
-Lens
A range of lenses are available from our dealers to satisfy varying installation and projection distance needs. See the Additional Information chapter for greater details on projection
distance and enlargement ratios.
Always contact our service centre to have the lens replaced.
Use only original or SIM2 Multimedia approved accessories.
Warning: for ceiling/wall installation, by means of suspension bracket, carefully follow the instructions and safety instruc- tions recommended by the Manufacturer in the bracket’s literature.
14SERIAL ENTERFACE AND EASY CINEMA
It is possible to control the projector through a personal com- puter with a RS232 serial connection.
With RS232 serial connection the customer can approach to an extensive control protocol that allow to utilize an advanced diagnostic functionality. This command is not present inside the normal On Screen Display.
The software that allows to utilise the extensive control protocol
is Easy Cinema®, a new Sim2 Multimedia product.
28