Shark PG-D4010X Rest your eyes occasionally, Avoid locations with extremes of temperature

Page 12

Observe the following safeguards when setting up your projector.

Caution concerning the lamp unit

■ Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Projector Dealer or Service Center for replacement.

See “Regarding the Lamp” on page 55.

Caution concerning the setup of the projector

■For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the vents and lens must be cleaned more often. As long as the projector is regularly cleaned, use in these environments will not reduce the overall operation life of the unit. Internal cleaning should only be performed by a Sharp Authorized Projector Dealer or Service Center.

When using the projector in high- altitude areas such as mountains (at altitudes of approximately 1,500 meters (4,900 feet) or more)

■When you use the projector in high-altitude areas with thin air, set “Fan Mode” to “High”. Neglecting this can affect the longevity of the optical system.

Warning about placing the projector in a high position

■When placing the projector in a high position, make certain it is carefully secure to avoid personal injury caused by the projector falling down.

Do not subject the projector to hard impact and/or vibration.

■Protect the lens so as not to hit or damage the surface of the lens.

Rest your eyes occasionally.

■Continuously watching the screen for long hours will cause eye strain. Take regular breaks to rest your eyes.

Do not set up the projector in places exposed to direct sunlight or bright light.

■Position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

Caution regarding placing of the projector

■Place the projector on a level site within the adjustment range (9 degrees) of the adjustment foot.

■After the projector is purchased, a faint smell from the vent may appear when the power is first turned on. This is normal and is not a malfunction. It will disappear after the projector is used for a while.

Avoid locations with extremes of temperature.

■The operating temperature of the projector is from 41°F to 95°F (+5°C to +35°C).

■The storage temperature of the projector is from –4°F to 140°F (–20°C to +60°C).

Do not block the exhaust and intake vents.

■Allow at least 11 13/16 inches (30 cm) of space between the exhaust vent and the nearest wall or obstruction.

■Ensure that the intake vent and the exhaust vent are not obstructed.

■If the cooling fan becomes obstructed, a protection circuit will automatically put the projector into standby mode to prevent overheat damage. This does not indicate a malfunction. (See pages 53 and 54.) Remove the projector power cord from the wall outlet and wait at least 10 minutes. Place the projector where the intake and exhaust vents are not blocked, plug the power cord back in and turn on the projector. This will return the projector to the normal operating condition.

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Setup PG-D4010XModel No Serial No This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianPage IntroductionENGLISH Void the users authority to operate this equipmentA. only OnlyMaintenance Troubleshooting Index Using the Menu ScreenFor Future Reference Contents Setting up the Projector Network Environment Network Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Closed Caption uses Bitstream Vera fontsWhen you want to view the Setup Manual Setup ManualFor Windows For MacintoshAccessories Optional accessoriesPart Names and Functions ProjectorTop View Front ViewUsing the Carrying Handle Using the Kensington LockRear View TerminalsCOMPUTER, DVI UP/PAGECLICK/EFFECT CLICK/RETURNRemote control signal transmitters Inserting the BatteriesUsable Range Setup and Projection Quick StartAdjust the projected image Setting up the Projector Setting up the ProjectorStandard Setup Front Projection Ceiling-mount SetupProjection PRJ Mode Example 43 Signal Input Normal Mode Picture Size120 Projection DistanceSignal Input Normal Mode Signal Input Stretch ModeScreen Size and Projection Distance Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer Connecting the Power Cord When connecting to the LAN terminal using a LAN cableAC socket Power cord SuppliedTurning the Projector On/Off Turning the Projector OnAdjusting the Projected Image Adjusting the Focus Adjusting the HeightAdjusting the Picture Size Image ProjectionPress Keystone to enter the Keystone Correction mode Press P/Q or O/R to adjust Keystone CorrectionCorrecting Trapezoidal Distortion Press KeystoneSwitching the Input Mode Adjusting the VolumeVIDEO, Video buttons AV Mute button VOL +/- Volume buttons On-screen displayResize Mode Press ResizeResize About Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeAuto Sync Auto Sync Adjustment Selecting the Picture ModeFreezing a Moving Image Displaying an Enlarged Portion of an ImageUsing the Remote Control as the Wireless Computer Mouse When moving the cursorWhen left-clicking When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Projector adjustment PRJ-ADJ menuNetwork menu Help menuItems you can set with the Help menu Help menu nUsing the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press MENU/HELPTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press EnterPicture Adjustment Picture Menu Selecting the Picture ModePAGE1 Menu operation nAdjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or ValueProgressive Reducing Image Noise DNREco+Quiet Adjusting the Projected Image SCR ADJ Menu Setting the Resize Mode2Adjusting the Image Position Setting the OverscanSetting the On-screen Display Closed CaptionSelecting the Background Image Reversing/Inverting Projected ImagesAuto Sync Auto Sync Adjustment Auto Power Off FunctionStandby Mode Auto Restart FunctionAudio Output Type Setting Speaker SettingFan Mode Setting Selecting the Transmission Speed RS-232CWhen the System Lock is set Checking the Lamp Life StatusEnter the same keycode in Re Confirm Input screen for keycodeKeylock Function Locking the Operation ButtonsTaking the Keylock off Setting a Password Select Password, then press Enter or QEnter the same password in Reconfirm, then press Enter On the projector, pressSetting up the Projector Network Environment Network Menu Dhcp Client SettingTCP/IP Setting Enter IP Address using P, R, Q and O, then press EnterTroubleshooting with the Help Menu Example When image flickering appearsEnter button Adjustment buttons P/R/O/Q MENU/HELP button Utilizing the Help Menu FunctionsMaintenance Cleaning the projectorCleaning the lens Cleaning the exhaust and intake ventsMaintenance Indicators About the temperature warning indicatorAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp A onlyRemoving and Installing the Lamp Unit Remove the lamp unit coverLamp unit AN-D400LPResetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 Sharp Electronics Corporation Specifications Dimensions Kensington Security Standard connector ·················13 Index

PG-D4010X specifications

The Shark PG-D4010X is a cutting-edge vacuum cleaner that has garnered attention for its versatility and powerful performance. Designed for both efficient cleaning and convenience, the PG-D4010X stands out as an excellent addition to any home.

One of the standout features of the Shark PG-D4010X is its double motor system, which enhances suction power significantly. This technology allows the vacuum to deliver strong cleaning results on a variety of surfaces, including carpets, hardwood floors, and tiles. With an impressive suction capability, it effortlessly removes dirt, dust, and pet hair, making it ideal for households with pets.

The PG-D4010X also incorporates advanced anti-allergen technology. Equipped with a HEPA filter, it captures 99.9% of allergens and pollutants, ensuring that the air in your home remains clean and fresh. This feature is particularly beneficial for allergy sufferers, as it helps to reduce irritants commonly found in household environments.

Another highlight of the Shark PG-D4010X is its lightweight design, which enhances usability. Weighing considerably less than traditional vacuum cleaners, it allows for easy maneuvering around the house. The ergonomic handle further contributes to a comfortable cleaning experience, reducing strain during longer cleaning sessions.

This vacuum cleaner also features a versatile cleaning head, designed to transition smoothly between different floor types. The DuoClean technology combines a bristle brush and a soft brushroll to pull in large debris, while also engaging with fine dust on both carpets and hard floors. This dual-brush system ensures a thorough clean in one pass, saving time and effort.

Additionally, the Shark PG-D4010X includes several attachments that enhance its cleaning capabilities. The crevice tool, pet power brush, and dusting brush allow users to tackle corners, upholstery, and surfaces that are often hard to reach. These attachments provide a comprehensive cleaning solution, making it suitable for various household tasks.

The vacuum also has a generous dust capacity, allowing users to clean larger areas without frequent emptying. Its easy-to-empty canister design simplifies the maintenance process, ensuring that cleaning can be completed efficiently.

In summary, the Shark PG-D4010X is an innovative vacuum cleaner that excels in both performance and convenience. With its powerful dual motor, advanced filtration, lightweight design, and versatility, it promises to deliver exceptional cleaning results, making it a worthwhile investment for homes looking for an effective cleaning solution.
Top Page Image Contents