Shark PG-D4010X quick start Resetting the Lamp Timer

Page 61

4

Remove the lamp unit.

Securing screws

 

 

• Loosen the securing screws from the lamp

 

 

unit. Hold the lamp unit and pull it in the

 

 

direction of the arrow. At this time, keep

 

 

the lamp unit horizontal and do not tilt it.

 

5

Insert the new lamp unit.

 

 

• Press the lamp unit fi rmly into the lamp unit

 

 

compartment. Fasten the securing screws.

 

6

Replace the lamp unit cover.

 

• Align the tab on the lamp unit cover (1) and place it while pressing the cover

(2) to close it. Then tighten the user service screw (3) to secure the lamp unit cover.

Info

• If the lamp unit and lamp unit cover are not correctly installed, the power will not turn on, even if the power cord is connected to the projector.

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp.

Info

•Make sure to reset the lamp timer only when replacing the lamp. If you reset the lamp timer

and continue to use the same lamp, this may cause the lamp to become damaged or explode.

1 Connect the power cord and open the lens shutter fully.

• Plug the power cord into the AC socket ofAC socket the projector.

2 Reset the lamp timer.

•While simultaneously holding down MENU/HELP, ENTER and R on the projector, press STANDBY/ON on the

projector.

• “LAMP 0000H” is displayed, indicating that the lamp timer is reset.

STANDBY/ON button

MENU/HELP button

ENTER button

R button

Appendix

57

Page 60 Page 62
Image 61
Page 60 Page 62
Contents PG-D4010X SetupModel No Serial No If YOU have ANY DOUBT, Consult a Qualified Electrician This Apparatus Must be EarthedPage Void the users authority to operate this equipment IntroductionENGLISHOnly A. onlyUsing the Menu Screen Maintenance Troubleshooting IndexFor Future Reference Contents Reference Setting up the Projector Network Environment Network MenuPower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOther connected equipment Closed Caption uses Bitstream Vera fontsSetup Manual When you want to view the Setup ManualFor Windows For MacintoshOptional accessories AccessoriesProjector Part Names and FunctionsTop View Front ViewUsing the Kensington Lock Using the Carrying HandleRear View TerminalsUP/PAGE COMPUTER, DVICLICK/EFFECT CLICK/RETURNInserting the Batteries Remote control signal transmittersUsable Range Quick Start Setup and ProjectionAdjust the projected image Setting up the Projector Setting up the ProjectorStandard Setup Front Projection Ceiling-mount SetupExample 43 Signal Input Normal Mode Picture Size Projection PRJ Mode120 Projection DistanceSignal Input Stretch Mode Signal Input Normal ModeScreen Size and Projection Distance You may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket Power cord SuppliedTurning the Projector On Turning the Projector On/OffAdjusting the Height Adjusting the Projected Image Adjusting the FocusAdjusting the Picture Size Image ProjectionPress P/Q or O/R to adjust Keystone Correction Press Keystone to enter the Keystone Correction modeCorrecting Trapezoidal Distortion Press KeystoneAdjusting the Volume Switching the Input ModeVIDEO, Video buttons AV Mute button VOL +/- Volume buttons On-screen displayPress Resize Resize ModeResize About Copyrights Displaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeSelecting the Picture Mode Auto Sync Auto Sync AdjustmentFreezing a Moving Image Displaying an Enlarged Portion of an ImageWhen moving the cursor Using the Remote Control as the Wireless Computer MouseWhen left-clicking When right-clickingPicture menu Menu ItemsProjector adjustment PRJ-ADJ menu Screen adjustment SCR-ADJ menuHelp menu Network menuItems you can set with the Help menu Help menu nMenu Selections Adjustments Using the Menu ScreenPress Q or O and select Picture to adjust Press MENU/HELPPress P or R and select Bright to adjust To adjust the projected image while watching itPress O or Q to adjust the item selected Press EnterSelecting the Picture Mode Picture Adjustment Picture MenuPAGE1 Menu operation nAdjusting the Color Temperature Adjusting the ImageAdjusting the Colors Adjusting Hue, Saturation, or ValueReducing Image Noise DNR ProgressiveEco+Quiet Setting the Resize Mode Adjusting the Projected Image SCR ADJ Menu2Adjusting the Image Position Setting the OverscanClosed Caption Setting the On-screen DisplaySelecting the Background Image Reversing/Inverting Projected ImagesAuto Power Off Function Auto Sync Auto Sync AdjustmentStandby Mode Auto Restart FunctionSpeaker Setting Audio Output Type SettingFan Mode Setting Selecting the Transmission Speed RS-232CChecking the Lamp Life Status When the System Lock is setEnter the same keycode in Re Confirm Input screen for keycodeLocking the Operation Buttons Keylock FunctionTaking the Keylock off Select Password, then press Enter or Q Setting a PasswordEnter the same password in Reconfirm, then press Enter On the projector, pressDhcp Client Setting Setting up the Projector Network Environment Network MenuTCP/IP Setting Enter IP Address using P, R, Q and O, then press EnterExample When image flickering appears Troubleshooting with the Help MenuEnter button Adjustment buttons P/R/O/Q MENU/HELP button Utilizing the Help Menu FunctionsCleaning the projector MaintenanceCleaning the lens Cleaning the exhaust and intake ventsAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Lamp Regarding the LampReplacing the Lamp A onlyRemove the lamp unit cover Removing and Installing the Lamp UnitLamp unit AN-D400LPResetting the Lamp Timer Computer Computer Compatibility Chart21-25 Troubleshooting52, 53 Sharp Electronics Corporation Specifications Dimensions Index Kensington Security Standard connector ·················13

PG-D4010X specifications

The Shark PG-D4010X is a cutting-edge vacuum cleaner that has garnered attention for its versatility and powerful performance. Designed for both efficient cleaning and convenience, the PG-D4010X stands out as an excellent addition to any home.

One of the standout features of the Shark PG-D4010X is its double motor system, which enhances suction power significantly. This technology allows the vacuum to deliver strong cleaning results on a variety of surfaces, including carpets, hardwood floors, and tiles. With an impressive suction capability, it effortlessly removes dirt, dust, and pet hair, making it ideal for households with pets.

The PG-D4010X also incorporates advanced anti-allergen technology. Equipped with a HEPA filter, it captures 99.9% of allergens and pollutants, ensuring that the air in your home remains clean and fresh. This feature is particularly beneficial for allergy sufferers, as it helps to reduce irritants commonly found in household environments.

Another highlight of the Shark PG-D4010X is its lightweight design, which enhances usability. Weighing considerably less than traditional vacuum cleaners, it allows for easy maneuvering around the house. The ergonomic handle further contributes to a comfortable cleaning experience, reducing strain during longer cleaning sessions.

This vacuum cleaner also features a versatile cleaning head, designed to transition smoothly between different floor types. The DuoClean technology combines a bristle brush and a soft brushroll to pull in large debris, while also engaging with fine dust on both carpets and hard floors. This dual-brush system ensures a thorough clean in one pass, saving time and effort.

Additionally, the Shark PG-D4010X includes several attachments that enhance its cleaning capabilities. The crevice tool, pet power brush, and dusting brush allow users to tackle corners, upholstery, and surfaces that are often hard to reach. These attachments provide a comprehensive cleaning solution, making it suitable for various household tasks.

The vacuum also has a generous dust capacity, allowing users to clean larger areas without frequent emptying. Its easy-to-empty canister design simplifies the maintenance process, ensuring that cleaning can be completed efficiently.

In summary, the Shark PG-D4010X is an innovative vacuum cleaner that excels in both performance and convenience. With its powerful dual motor, advanced filtration, lightweight design, and versatility, it promises to deliver exceptional cleaning results, making it a worthwhile investment for homes looking for an effective cleaning solution.
Top Page Image Contents