Shark PG-D4010X quick start Maintenance, Cleaning the projector, Cleaning the lens

Page 56

Maintenance

Cleaning the projector

■Ensure that you have unplugged the power cord before cleaning the projector.

■The cabinet as well as the operation panel is made of plastic. Avoid using benzene or thinner, as these can damage the fi nish on the cabinet.

■Do not use volatile agents such as insecticides on the projector.

Do not attach rubber or plastic items to the projector for long periods.

The effects of some of the agents in the plastic may cause damage to the quality or fi nish of the projector.

■Wipe off dirt gently with a soft fl annel cloth.

■When the dirt is hard to remove, soak a cloth in a mild detergent diluted with water, wring the cloth well and then wipe the projector. Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector before use.

Cleaning the lens

■Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating fi lm on the surface of the lens.

■As the surface of the lens can easily get damaged, be careful not to scrape or hit the lens.

Cleaning the exhaust and intake vents

■Use a vacuum cleaner to clean dust from the exhaust vent and the intake vent.

Wax

Mild detergent diluted

with water

Thinner

Info

•If you want to clean the air vents during projector operation, ensure you press STANDBY/ON on the projector or STANDBY on the remote control and put the projector into standby mode. After the cooling fan has stopped, clean the vents.

52

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Setup PG-D4010XModel No Serial No This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianPage IntroductionENGLISH Void the users authority to operate this equipmentA. only OnlyFor Future Reference Maintenance Troubleshooting IndexUsing the Menu Screen Contents Setting up the Projector Network Environment Network Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Using the projector in other countries Temperature monitor functionOther connected equipment Closed Caption uses Bitstream Vera fontsWhen you want to view the Setup Manual Setup ManualFor Windows For MacintoshAccessories Optional accessoriesPart Names and Functions ProjectorTop View Front ViewUsing the Carrying Handle Using the Kensington LockRear View TerminalsCOMPUTER, DVI UP/PAGECLICK/EFFECT CLICK/RETURNUsable Range Remote control signal transmittersInserting the Batteries Setup and Projection Quick StartAdjust the projected image Setting up the Projector Setting up the ProjectorStandard Setup Front Projection Ceiling-mount SetupProjection PRJ Mode Example 43 Signal Input Normal Mode Picture Size120 Projection DistanceScreen Size and Projection Distance Signal Input Normal ModeSignal Input Stretch Mode Connecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Audio Controlling the Projector by a Computer Connecting the Power Cord When connecting to the LAN terminal using a LAN cableAC socket Power cord SuppliedTurning the Projector On/Off Turning the Projector OnAdjusting the Projected Image Adjusting the Focus Adjusting the HeightAdjusting the Picture Size Image ProjectionPress Keystone to enter the Keystone Correction mode Press P/Q or O/R to adjust Keystone CorrectionCorrecting Trapezoidal Distortion Press KeystoneSwitching the Input Mode Adjusting the VolumeVIDEO, Video buttons AV Mute button VOL +/- Volume buttons On-screen displayResize Resize ModePress Resize About Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeAuto Sync Auto Sync Adjustment Selecting the Picture ModeFreezing a Moving Image Displaying an Enlarged Portion of an ImageUsing the Remote Control as the Wireless Computer Mouse When moving the cursorWhen left-clicking When right-clickingMenu Items Picture menuScreen adjustment SCR-ADJ menu Projector adjustment PRJ-ADJ menuNetwork menu Help menuItems you can set with the Help menu Help menu nUsing the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press MENU/HELPTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press EnterPicture Adjustment Picture Menu Selecting the Picture ModePAGE1 Menu operation nAdjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or ValueEco+Quiet ProgressiveReducing Image Noise DNR Adjusting the Projected Image SCR ADJ Menu Setting the Resize Mode2Adjusting the Image Position Setting the OverscanSetting the On-screen Display Closed CaptionSelecting the Background Image Reversing/Inverting Projected ImagesAuto Sync Auto Sync Adjustment Auto Power Off FunctionStandby Mode Auto Restart FunctionAudio Output Type Setting Speaker SettingFan Mode Setting Selecting the Transmission Speed RS-232CWhen the System Lock is set Checking the Lamp Life StatusEnter the same keycode in Re Confirm Input screen for keycodeTaking the Keylock off Keylock FunctionLocking the Operation Buttons Setting a Password Select Password, then press Enter or QEnter the same password in Reconfirm, then press Enter On the projector, pressSetting up the Projector Network Environment Network Menu Dhcp Client SettingTCP/IP Setting Enter IP Address using P, R, Q and O, then press EnterTroubleshooting with the Help Menu Example When image flickering appearsEnter button Adjustment buttons P/R/O/Q MENU/HELP button Utilizing the Help Menu FunctionsMaintenance Cleaning the projectorCleaning the lens Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp A onlyRemoving and Installing the Lamp Unit Remove the lamp unit coverLamp unit AN-D400LPResetting the Lamp Timer Computer Compatibility Chart ComputerTroubleshooting 21-2552, 53 Sharp Electronics Corporation Specifications Dimensions Kensington Security Standard connector ·················13 Index

PG-D4010X specifications

The Shark PG-D4010X is a cutting-edge vacuum cleaner that has garnered attention for its versatility and powerful performance. Designed for both efficient cleaning and convenience, the PG-D4010X stands out as an excellent addition to any home.

One of the standout features of the Shark PG-D4010X is its double motor system, which enhances suction power significantly. This technology allows the vacuum to deliver strong cleaning results on a variety of surfaces, including carpets, hardwood floors, and tiles. With an impressive suction capability, it effortlessly removes dirt, dust, and pet hair, making it ideal for households with pets.

The PG-D4010X also incorporates advanced anti-allergen technology. Equipped with a HEPA filter, it captures 99.9% of allergens and pollutants, ensuring that the air in your home remains clean and fresh. This feature is particularly beneficial for allergy sufferers, as it helps to reduce irritants commonly found in household environments.

Another highlight of the Shark PG-D4010X is its lightweight design, which enhances usability. Weighing considerably less than traditional vacuum cleaners, it allows for easy maneuvering around the house. The ergonomic handle further contributes to a comfortable cleaning experience, reducing strain during longer cleaning sessions.

This vacuum cleaner also features a versatile cleaning head, designed to transition smoothly between different floor types. The DuoClean technology combines a bristle brush and a soft brushroll to pull in large debris, while also engaging with fine dust on both carpets and hard floors. This dual-brush system ensures a thorough clean in one pass, saving time and effort.

Additionally, the Shark PG-D4010X includes several attachments that enhance its cleaning capabilities. The crevice tool, pet power brush, and dusting brush allow users to tackle corners, upholstery, and surfaces that are often hard to reach. These attachments provide a comprehensive cleaning solution, making it suitable for various household tasks.

The vacuum also has a generous dust capacity, allowing users to clean larger areas without frequent emptying. Its easy-to-empty canister design simplifies the maintenance process, ensuring that cleaning can be completed efficiently.

In summary, the Shark PG-D4010X is an innovative vacuum cleaner that excels in both performance and convenience. With its powerful dual motor, advanced filtration, lightweight design, and versatility, it promises to deliver exceptional cleaning results, making it a worthwhile investment for homes looking for an effective cleaning solution.
Top Page Image Contents