Vidikron 30ET manual 1Introduction, About This Manual

Page 11

1Introduction

This Owner’s Manual describes how to install, set up and operate the Vidikron Vision Model 30 family of Digital Light Processing™ Projectors:

•Vision 30

•Vision 30ET (Extended Throw)

•Vision 30 CineWide™

•Vision 30ET CineWide™

1.1

About This Manual

Throughout this manual, all four projector models are referred to collectively as the “Vision 30.” Except where noted, the features and functions described in this manual are common to all versions of this product.

Vidikron has prepared this manual to help home theater installers and end users get the

Target Audience

most out of the Vision 30.

 

Vidikron has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest version of this and other Vidikron product manuals on-line, at www.Vidikron.com.

Vidikron welcomes your comments about this manual. Send them to info@vidikron.com.

If You Have Comments About

 

This Manual...

Text Conventions: The following conventions are used in this manual, in order to clarify the

Textual and Graphic

information and instructions provided:

Conventions

•Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.”

•Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type x063x <Enter>.”

•All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: <Enter>, <Spacebar>, <Control>, <Esc> and <Tab>.

•<Enter> indicates that you may press either the RETURN or ENTER key on your keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example:

A carriage return must be used after each command or string.

Note

Vidikron Vision 30 Series Owner’s Operating Manual

1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DLP Projectors Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyEffective Warranty Date Vidikron Safety Precautions 1Table of Contents Serial Communications Maintenance and TroubleshootingSpecifications OperationVision 30/CineWide with Anamorphic Lens Base Plate 1List of FiguresList of Figures This Manual 1IntroductionAbout This Manual If you need Turn to Using This ManualDescription, Features and Benefits Optional Accessories Vision 30 at a Glance POWER/STANDBY LED Indicates power status as followsProjection Lens Temp LEDIntake Vent Front IR Sensor Vidikron Logo BUILT-IN Keypad Connector PanelRefer to Vision 30 Connector Panel, below Main Power SwitchVision 30 Connector Panel RS-232 Control Port Built-In KeypadHdmi Digital Comp 2 / RGBVision 30 Remote Control Vision 30 Remote ControlCinema RGB HDHdmi DEF MEM1ISF NT ISF DAYRemote Control/Built-In Keypad Functional Cross-Reference Remote Control/Built-In Keypad Functional ComparisonControls and Functions Operation 3InstallationRemote Control Step Procedure For Details, Refer to Quick SetupInstallation Overview Advantages Considerations Installation ConsiderationsProjector Installation Options Installation TypeThrow Ratios for the Vision 30 Series Position Vertical and HorizontalMounting the Vision Screws SECURELY, but do not OVER-TIGHTEN Them Installing the Optional CineWide Lens MountIf you are mounting the Vision 30/CineWide on a ceiling Connections to the Vision Connector Panel AccessConnecting Source Personal Computer Progressive Component Video Connections DTV Source DVD Player, VCR Satellite Receiver Etc RS-232 Control System Connection ConnectionRemoving the Lens Cap Connecting to AC PowerZoom and Focus Adjustments Turning On the PowerChanging the OSD Language Adjusting the Picture Orientation Primary lens is perfectly centered on the screen Installing and Adjusting the CineWide Anamorphic LensLens Adjusting the Anamorphic Height Y Adjustment LensCorrect Lens Angle Incorrect Lens Angle Anamorphic Lens Top View Selecting an Aspect Ratio Selecting An Input Source Using Picture-In-Picture and Picture-By-Picture PIP/PBP4Operation Selecting Video MemoryUsing the On-Screen Menus Turning Off the PowerISF Main Menu Picture AdjustTypical Pluge Pattern for Adjusting Brightness Perform the adjustments in the order listed hereGray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Image Option Image OptionDescription Aspect Ratio SettingsRemote Projector Status Exit to return to the previous menu or Menu to exit InstallationService ServiceOperation Operation Remote Control ISF Calibration ISF CalibrationOperation Operation Lamp assembly for replacement 5Maintenance and TroubleshootingLamp Replacement Symptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Troubleshooting Chart Maintenance and Troubleshooting 6Serial Communications Serial Command SyntaxRS-232 Connection and Port Configuration Serial CommandsSerial Communications Serial Commands Serial Communications Vision 30 Specifications 7SpecificationsDimensions Home Theater Calibration SpecificationsIndustry-Standard Specifications Power RequirementsVidikron DimensionsSpecifications Personalizing the ISF Splash Screen on the Vision Power-cycle the projector to see the change Page RUMA-011140
Related manuals
Manual 58 pages 25.8 Kb

30ET, 30 specifications

Vidikron 30 is a standout in the world of high-performance projectors, designed primarily for home theater enthusiasts and professional installations. This model is known for its advanced technologies and exceptional image quality, catering to both casual viewers and serious cinephiles.

One of the most notable features of the Vidikron 30 is its native 4K resolution. This high pixel count ensures that images are incredibly sharp and detailed, making every frame come to life with stunning clarity. The projector utilizes advanced pixel-shifting technologies to enhance image fidelity, providing an immersive viewing experience that is hard to replicate.

The Vidikron 30 boasts an impressive contrast ratio, allowing for deep blacks and bright whites, which is crucial for experiencing the full dynamic range of films and shows. This feature is complemented by its superior color accuracy, featuring advanced color management systems that deliver vibrant and true-to-life colors. The projector is equipped with High Dynamic Range (HDR) capabilities, ensuring that users can enjoy a wide range of brightness levels.

Audio experience is another area where the Vidikron 30 excels. It is designed to support high-quality audio formats, making it compatible with several advanced surround sound systems. This harmony between visual and audio quality ensures an all-encompassing cinematic experience.

In terms of connectivity, the Vidikron 30 offers multiple input options, including HDMI, USB, and legacy connections, making it versatile and easy to integrate into various home theater setups. It also supports wireless streaming, allowing users to connect their devices effortlessly.

The design of the Vidikron 30 is sleek and sophisticated, fitting seamlessly into modern living spaces. Its silent operation feature is another bonus, enabling users to enjoy movies without disruptive noise from the projector itself.

Lastly, Vidikron provides a comprehensive support system for its projectors, including calibration services to ensure optimal performance and longevity.

In summary, the Vidikron 30 is a powerhouse of home projection technology, combining high resolution, superior contrast and color accuracy, and excellent audio support. Its elegant design and extensive connectivity options make it a top choice for anyone looking to achieve a premium home theater experience.
Top Page Image Contents