Vidikron 30ET Home Theater Calibration Specifications, Industry-Standard Specifications, Lamp

Page 72

Specifications

Table 7-1. Vision 30 Specifications (continued)

Brightness and Contrast:

Cinema Standards Measurement System (CSMS)

 

Specifications

 

-

Brightness: 12.5 to 19.0 foot-Lamberts (fL)

 

-

Contrast Ratio: 188:1 to 203:1

 

These measurements are taken from the projector in a controlled, home

 

theater environment. All measurements are made to ANSI/NAPM

 

IT7.228-1997 specifications using the Photo Research PR-650

 

SpectraColorimeter and Minolta LS-100 Luminance Meter, Video

 

Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is

 

calibrated to a color temperature of 6,500K and has a minimum of 150

 

hours of usage.

 

The foot-Lambert (fL) is the unit of measurement used in commercial

 

movie theaters to express image brightness at the screen surface. The

 

Society of Motion Picture and Television Engineers (SMPTE) specifies

 

16 fL as the target image brightness for film-based projectors using an

 

open gate (without film in the projector). More importantly, today

 

SMPTE specifies 12 fL as the target image brightness in Digital Cinema

 

theaters. The foot-Lambert measurement is dependent on screen size,

 

screen gain and projector light output.

 

Home Theater Calibration Specifications

 

-

Light Output: 400 to 525 ANSI Lumens

 

-

Contrast Ratio: 188:1 to 203:1

 

These specifications are obtained by calibrating the projector as

 

described above for CSMS measurements.

 

Industry-Standard Specifications

 

-

Light Output: 1100 ANSI Lumens

 

-

Contrast Ratio: 1350:1 to 2150:1

 

These are typical projector brightness and contrast specifications found

 

in most companies’ sales literature. Vidikron includes these

 

measurements in its literature to allow for direct comparison with other

 

manufacturers’ projectors. These measurements are typically taken at

 

9,000K to 13,000K to get expected performance data when the projector

 

is used in professional, commercial and industrial displays.

 

 

Lamp:

250 Watts

 

 

Estimated Lamp Life:

2000 hours

 

 

Power Requirements:

100 to 240 VAC (auto-sensing), 50/60 Hz, 310 Watts

 

 

Operating Environment:

41°F to 95°F (5°C to 35°C), 20% to 80% humidity

 

(non-condensing)

 

 

Dimensions:

See Figure 7-1

 

 

Weight (without lens):

31.5 lbs. (14.29 kg)

 

 

Regulatory Approvals:

Complies with FCC, CE C-Tick

 

 

Limited Warranty:

Projector: Two (2) years parts and labor from the date of delivery

 

to the end user.

 

Lamp: 1000 hours or six (6) months, whichever comes first.

Specifications are subject to change without notice.

62

Vidikron Vision 30 Series Owner’s Operating Manual

Image 72
Contents DLP Projectors Page TWO Year Limited Warranty For Projectors, Video Processors and ControllersEffective Warranty Date Vidikron Safety Precautions 1Table of Contents Maintenance and Troubleshooting SpecificationsOperation Serial Communications1List of Figures Vision 30/CineWide with Anamorphic Lens Base PlateList of Figures 1Introduction About This ManualThis Manual Using This Manual If you need Turn toDescription, Features and Benefits Optional Accessories POWER/STANDBY LED Indicates power status as follows Vision 30 at a GlanceTemp LED Intake Vent Front IR Sensor Vidikron LogoProjection Lens Connector Panel Refer to Vision 30 Connector Panel, belowMain Power Switch BUILT-IN KeypadVision 30 Connector Panel Built-In Keypad Hdmi DigitalComp 2 / RGB RS-232 Control PortVision 30 Remote Control Vision 30 Remote ControlRGB HD HdmiCinema MEM1 ISF NTISF DAY DEFRemote Control/Built-In Keypad Functional Comparison Remote Control/Built-In Keypad Functional Cross-ReferenceControls and Functions 3Installation Remote ControlOperation Quick Setup Installation OverviewStep Procedure For Details, Refer to Installation Considerations Projector Installation OptionsInstallation Type Advantages ConsiderationsThrow Ratios for the Vision 30 Series Vertical and Horizontal PositionMounting the Vision Installing the Optional CineWide Lens Mount If you are mounting the Vision 30/CineWide on a ceilingScrews SECURELY, but do not OVER-TIGHTEN Them Connector Panel Access Connecting SourceConnections to the Vision Personal Computer Progressive Component Video Connections DTV Source DVD Player, VCR Satellite Receiver Etc Connection RS-232 Control System ConnectionConnecting to AC Power Removing the Lens CapTurning On the Power Changing the OSD Language Adjusting the Picture OrientationZoom and Focus Adjustments Installing and Adjusting the CineWide Anamorphic Lens Primary lens is perfectly centered on the screenAdjusting the Anamorphic Height Y Adjustment Lens LensCorrect Lens Angle Incorrect Lens Angle Anamorphic Lens Top View Using Picture-In-Picture and Picture-By-Picture PIP/PBP 4OperationSelecting Video Memory Selecting an Aspect Ratio Selecting An Input SourceTurning Off the Power Using the On-Screen MenusISF Picture Adjust Main MenuPerform the adjustments in the order listed here Typical Pluge Pattern for Adjusting BrightnessGray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Image Option Image OptionAspect Ratio Settings DescriptionRemote Projector Status Installation Exit to return to the previous menu or Menu to exitService ServiceOperation Operation Remote Control ISF Calibration ISF CalibrationOperation Operation 5Maintenance and Troubleshooting Lamp ReplacementLamp assembly for replacement Troubleshooting Tips Troubleshooting ChartSymptom Possible Causes Solution Troubleshooting Chart Maintenance and Troubleshooting Serial Command Syntax RS-232 Connection and Port ConfigurationSerial Commands 6Serial CommunicationsSerial Communications Serial Commands Serial Communications 7Specifications Vision 30 SpecificationsHome Theater Calibration Specifications Industry-Standard SpecificationsPower Requirements DimensionsDimensions VidikronSpecifications Personalizing the ISF Splash Screen on the Vision Power-cycle the projector to see the change Page RUMA-011140
Related manuals
Manual 58 pages 25.8 Kb

30ET, 30 specifications

Vidikron 30 is a standout in the world of high-performance projectors, designed primarily for home theater enthusiasts and professional installations. This model is known for its advanced technologies and exceptional image quality, catering to both casual viewers and serious cinephiles.

One of the most notable features of the Vidikron 30 is its native 4K resolution. This high pixel count ensures that images are incredibly sharp and detailed, making every frame come to life with stunning clarity. The projector utilizes advanced pixel-shifting technologies to enhance image fidelity, providing an immersive viewing experience that is hard to replicate.

The Vidikron 30 boasts an impressive contrast ratio, allowing for deep blacks and bright whites, which is crucial for experiencing the full dynamic range of films and shows. This feature is complemented by its superior color accuracy, featuring advanced color management systems that deliver vibrant and true-to-life colors. The projector is equipped with High Dynamic Range (HDR) capabilities, ensuring that users can enjoy a wide range of brightness levels.

Audio experience is another area where the Vidikron 30 excels. It is designed to support high-quality audio formats, making it compatible with several advanced surround sound systems. This harmony between visual and audio quality ensures an all-encompassing cinematic experience.

In terms of connectivity, the Vidikron 30 offers multiple input options, including HDMI, USB, and legacy connections, making it versatile and easy to integrate into various home theater setups. It also supports wireless streaming, allowing users to connect their devices effortlessly.

The design of the Vidikron 30 is sleek and sophisticated, fitting seamlessly into modern living spaces. Its silent operation feature is another bonus, enabling users to enjoy movies without disruptive noise from the projector itself.

Lastly, Vidikron provides a comprehensive support system for its projectors, including calibration services to ensure optimal performance and longevity.

In summary, the Vidikron 30 is a powerhouse of home projection technology, combining high resolution, superior contrast and color accuracy, and excellent audio support. Its elegant design and extensive connectivity options make it a top choice for anyone looking to achieve a premium home theater experience.