Vidikron 30 manual Connector Panel, Built-In Control Panel

Controls and Functions

Connector Panel

To access the connector panel, press the door release button so it pops out. Turn the knob clockwise or counter-clockwise and pull firmly on it to open the door.

1.S-Video (mini DIN 4-pin) Y/C (S-video) signal input

2.12v Trigger (mini jack, diameter 5.5 mm outside, 2.5 mm inside) +12V output, active when the projector is turned on

3.Video (RCA Jack) Composite video signal input

4.Component (RCA Jacks)

480i Component (Y/CB/CR) video signal input

5.HDMI (High-Definition Multimedia Interface) Input Digital video signal input

6.RGB/ HDTV (BNC) or Progressive Scan DVD players DTV Y/PB/PR or DTV RGB video signal input

7.RS-232C (RJ-11 Jack)

RS-232C control signal input (refer to page 51 for details)

Built-In Control Panel	To control the projector when signals from a remote control
	cannot reach it, use the built-in keypad next to the connector
	panel.
	Because the built-in keypad has fewer keys than the remote
	keypad, certain projector functions are accessible only through
	the menu system rather than via a direct key.

	MEMORY
	MEMORY
	AUTO
	AUTO
POWER	MENU	SOURCE
	/EXIT	/ENTER
POWER	/EXIT	/ENTER
	MENU	SOURCE

14 Vidikron Vision Model 30 Owner’s Operating Manual