Vidikron 30 manual Exitmenu Offon

Basic Operation

•Press MENU to open or close the on-screen menu.

•Use the arrow buttons (▲,◄,▼,►) to select menu items or make adjustments.

•Press ENTER or ► to enter the setting of items in the menu, or press EXIT to leave and save the setting of items in the menu.

For more information on settings, See “On- Screen Display Menus” on page 33.

•When you turn on the projector, it searches for the input source you selected last time.

•You may select the input source directly on the remote control.

•For PIP (Picture In Picture) and PBP (Picture By Picture) purposes, there are two groups of inputs separated by their display modes:

Video group: Video, S-Video and Component Y/CB/CR inputs.

Graphic (HD) group: HDMI and RGB/ Component HD inputs.

•PIP / PBP shows one input from the Graphic group within or beside one input from the Video group.

•Press PBP to enable the PBP function. Press PBP again to switch the screens left to right. Press PBP again to turn PBP off.

•Press ACTIVE to switch to the active window. You can only change the input signal settings in the active window.

•Press PIP to enable the PIP function. Press PIP again to switch the main window. Press PIP again to turn PIP off.

•Press PIP+ or PIP- to adjust the size of the PIP window.

•Adjust the position of the PIP window with the arrow buttons (▲,◄,▼,►).

EXITMENU

OFFON

COMP 1	S-VID	VIDEO
COMP 2	RGB HD	HDMI

PIP PIP+ ACTIVE

PBP PIP- VAC

Using the Menus

Selecting the Input Source

PIP / PBP Function

Vidikron Vision Model 30 Owner’s Operating Manual 31