Vidikron 30 manual Basic Operation, Removing the Lens Cap Turning on the Power

Page 29

Basic Operation

Press the lens latches together to remove the lens cap.

To replace the cap, push it squarely over the lens until it snaps on.

Turn on the main power switch on the rear of the projector. The POWER LED will light orange.

Press the ON button on the remote control to turn on the projector. The POWER LED flashes orange during the warm up period, then lights solid green.

“Searching….” appears on the screen before the projector identifies the input signal, and remains there until a valid signal is detected.

If an incompatible input signal exceeds the range of the projector, a “No signal supported” message appears on the screen. This message remains on the screen until you change the input signal.

Removing the Lens

Cap

Turning on the Power

OFFON

COMP 1

S-VID

VIDEO

COMP 2

RGB HD

HDMI

Adjust the projected image size with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens.

Zoom out

Focus

Zoom in

Adjusting the Zoom and Focus

To adjust the projector height or projection angle, or to compensate for a mounting surface that isn’t level, turn the four adjustable feet on the bottom of the projector.

Adjusting Projector Height or Projection Angle

Vidikron Vision Model 30 Owner’s Operating Manual

29

Image 29
Contents DLP Projector Page Table of Contents Lamp Replacement Troubleshooting RS-232 Setup Warranty TWO Year Limited WarrantyRIGHTS, Limits and Exclusions Vidikron Safety Precautions Overview Top IR Sensor Status LEDs Exhaust VentIntake Vent Front IR Sensor Vidikron Logo Projection LensAC Power in Socket AC Power Switch Cable Access Door Connector PanelFront / Rear Adjusters Built-in Control PanelThis page is intentionally left blank Control Panel Controls and FunctionsBuilt-In Control Panel Connector PanelEnter Vidikron Logo Remote ControlRemote Control Control Panel Remote Control Functions Compared This page is intentionally left blank About the Batteries InstallationAbout the Remote Control Screen Type and Size Front Screen Installations Installation ConsiderationsScreen size Rear screen installationsInstallation Floor Installation Ceiling InstallationMounting Folded Optics Connections Connecting Video InputsConnections Hdmi Source DVD player or HD tuner with Hdmi or DVI out Connecting an Hdmi DeviceConnecting to AC Power Adjusting the Zoom and Focus Removing the Lens Cap Turning on the PowerAdjusting Projector Height or Projection Angle Basic OperationRatio Selecting VideoMemory Selecting an Aspect Exitmenu Offon Turning off the Power On-Screen Display Menus Picture Quality Adjustments Color Temperature Anamorphic Letterbox Image OptionsStandard 4/3 IntelliWideCinema Fill CinemaHD/RGB Adjust Projector Status Installation InstallationService ServiceEnter On-Screen Display Menus RS-232 Baud Rate ISF Calibration ISF CalibrationISF Enable Lamp Replacement Lamp Replacement Troubleshooting Troubleshooting RS-232 Pin Assignments Sub 9-pin female Pin RJ-11 Function RS-232 SetupConnecting RS-232 to the Projector Code Function RS-232C Control CodesCodes RS-232C ControlThis page is intentionally left blank Horizontal Vertical Offset Lamp Lamp Life Inputs 12V Output SpecificationsDimensions Brightness Contrast Power RequirementsDimensions RUMA-011140
Related manuals
Manual 78 pages 43.76 Kb

30 specifications

Vidikron 30 is a standout in the world of high-performance projectors, designed primarily for home theater enthusiasts and professional installations. This model is known for its advanced technologies and exceptional image quality, catering to both casual viewers and serious cinephiles.

One of the most notable features of the Vidikron 30 is its native 4K resolution. This high pixel count ensures that images are incredibly sharp and detailed, making every frame come to life with stunning clarity. The projector utilizes advanced pixel-shifting technologies to enhance image fidelity, providing an immersive viewing experience that is hard to replicate.

The Vidikron 30 boasts an impressive contrast ratio, allowing for deep blacks and bright whites, which is crucial for experiencing the full dynamic range of films and shows. This feature is complemented by its superior color accuracy, featuring advanced color management systems that deliver vibrant and true-to-life colors. The projector is equipped with High Dynamic Range (HDR) capabilities, ensuring that users can enjoy a wide range of brightness levels.

Audio experience is another area where the Vidikron 30 excels. It is designed to support high-quality audio formats, making it compatible with several advanced surround sound systems. This harmony between visual and audio quality ensures an all-encompassing cinematic experience.

In terms of connectivity, the Vidikron 30 offers multiple input options, including HDMI, USB, and legacy connections, making it versatile and easy to integrate into various home theater setups. It also supports wireless streaming, allowing users to connect their devices effortlessly.

The design of the Vidikron 30 is sleek and sophisticated, fitting seamlessly into modern living spaces. Its silent operation feature is another bonus, enabling users to enjoy movies without disruptive noise from the projector itself.

Lastly, Vidikron provides a comprehensive support system for its projectors, including calibration services to ensure optimal performance and longevity.

In summary, the Vidikron 30 is a powerhouse of home projection technology, combining high resolution, superior contrast and color accuracy, and excellent audio support. Its elegant design and extensive connectivity options make it a top choice for anyone looking to achieve a premium home theater experience.