Vidikron 30 manual On-Screen Display Menus

Page 43

On-Screen Display Menus

Image Over Scan pushes the outside edge of the active picture area of the video signal out beyond the edge of the display area.

Some television programs are produced based on the assumption that older television sets may not display the outer edges of the broadcast picture area. Over scan effectively trims away these inactive, outer edges and enlarges the remaining portion of the image to fill the display area.

Use the on-screen slidebar to set the desired amount of over scan.

For HDTV, DVDs and other video sources, Over Scan is generally not necessary or desirable.

This control compensates for incoming elevated black levels present in certain video signals, and ensures that blacks in the display are neither “crushed” (where dark grays appear black) nor excessively elevated (where blacks appear dark gray). By default, the projector automatically determines the best setting according to the type of incoming video signal:

0 IRE – Used for DVD output with “enhanced black,” SECAM, most PAL standards and Japanese NTSC.

7.5 IRE – Used for most NTSC video signals.

For some types of video, you may want to override the setting. Generally, if black appears crushed when brightness = 30, choose “0 IRE”. If black appears excessively elevated, use “7.5 IRE”.

The Image Shift menu allows you to precisely center the image on the screen. (These controls are available only with a 480i source signal.)

Horizontal: This control moves the image right or left within the area of available pixels.

Vertical: This option moves the image up or down within the area of available pixels.

NOTES:

1.To adjust the image position with a 480p or higher-resolution source, use the HD/RGB Adjust controls in the Image Option menu, described on page 36.

2.The values shown represent where the approximate center of the image lies in relation to the total number of pixels available horizontally or vertically. This varies widely according to the signal; watch the image while adjusting.

This menu item is reserved for future use.

The Amplitude menu allows you to fine-tune the image aspect ratio by stretching it horizontally or vertically, in small increments. The Horizontal control adjusts the image width while keeping the height constant. Similarly, the Vertical control adjusts the image height while keeping the width constant.

Select Fan Control from the Service Menu to control the operation of the projector’s cooling fan.

Mode: In most cases, the default Fan Control Mode (Auto Normal) will maintain the correct operating temperature. If the lamp frequently turns off due to overheating, or in certain high-altitude operating environments, you may need to change this setting to Auto Hi. Altitude or Manual.

Image Over Scan

Video Black Level

Image Shift

Horizontal Masking

Amplitude

Fan Control

Vidikron Vision Model 30 Owner’s Operating Manual

43

Image 43
Contents DLP Projector Page Table of Contents Lamp Replacement Troubleshooting RS-232 Setup Warranty TWO Year Limited WarrantyRIGHTS, Limits and Exclusions Vidikron Safety Precautions Overview Projection Lens Exhaust VentTop IR Sensor Status LEDs Intake Vent Front IR Sensor Vidikron LogoBuilt-in Control Panel Connector PanelAC Power in Socket AC Power Switch Cable Access Door Front / Rear AdjustersThis page is intentionally left blank Control Panel Controls and FunctionsBuilt-In Control Panel Connector PanelEnter Vidikron Logo Remote ControlRemote Control Control Panel Remote Control Functions Compared This page is intentionally left blank About the Remote Control InstallationAbout the Batteries Screen Type and Size Front Screen Installations Installation ConsiderationsScreen size Rear screen installationsInstallation Floor Installation Ceiling InstallationMounting Folded Optics Connections Connecting Video InputsConnections Hdmi Source DVD player or HD tuner with Hdmi or DVI out Connecting an Hdmi DeviceConnecting to AC Power Basic Operation Removing the Lens Cap Turning on the PowerAdjusting the Zoom and Focus Adjusting Projector Height or Projection AngleMemory Selecting an Aspect Selecting VideoRatio Exitmenu Offon Turning off the Power On-Screen Display Menus Picture Quality Adjustments Color Temperature IntelliWide Image OptionsAnamorphic Letterbox Standard 4/3Cinema Fill CinemaHD/RGB Adjust Projector Status Installation InstallationService ServiceEnter On-Screen Display Menus RS-232 Baud Rate ISF Calibration ISF CalibrationISF Enable Lamp Replacement Lamp Replacement Troubleshooting Troubleshooting Connecting RS-232 to the Projector RS-232 SetupRS-232 Pin Assignments Sub 9-pin female Pin RJ-11 Function Code Function RS-232C Control CodesCodes RS-232C ControlThis page is intentionally left blank Horizontal Vertical Offset Lamp Lamp Life Inputs 12V Output SpecificationsDimensions Brightness Contrast Power RequirementsDimensions RUMA-011140
Related manuals
Manual 78 pages 43.76 Kb

30 specifications

Vidikron 30 is a standout in the world of high-performance projectors, designed primarily for home theater enthusiasts and professional installations. This model is known for its advanced technologies and exceptional image quality, catering to both casual viewers and serious cinephiles.

One of the most notable features of the Vidikron 30 is its native 4K resolution. This high pixel count ensures that images are incredibly sharp and detailed, making every frame come to life with stunning clarity. The projector utilizes advanced pixel-shifting technologies to enhance image fidelity, providing an immersive viewing experience that is hard to replicate.

The Vidikron 30 boasts an impressive contrast ratio, allowing for deep blacks and bright whites, which is crucial for experiencing the full dynamic range of films and shows. This feature is complemented by its superior color accuracy, featuring advanced color management systems that deliver vibrant and true-to-life colors. The projector is equipped with High Dynamic Range (HDR) capabilities, ensuring that users can enjoy a wide range of brightness levels.

Audio experience is another area where the Vidikron 30 excels. It is designed to support high-quality audio formats, making it compatible with several advanced surround sound systems. This harmony between visual and audio quality ensures an all-encompassing cinematic experience.

In terms of connectivity, the Vidikron 30 offers multiple input options, including HDMI, USB, and legacy connections, making it versatile and easy to integrate into various home theater setups. It also supports wireless streaming, allowing users to connect their devices effortlessly.

The design of the Vidikron 30 is sleek and sophisticated, fitting seamlessly into modern living spaces. Its silent operation feature is another bonus, enabling users to enjoy movies without disruptive noise from the projector itself.

Lastly, Vidikron provides a comprehensive support system for its projectors, including calibration services to ensure optimal performance and longevity.

In summary, the Vidikron 30 is a powerhouse of home projection technology, combining high resolution, superior contrast and color accuracy, and excellent audio support. Its elegant design and extensive connectivity options make it a top choice for anyone looking to achieve a premium home theater experience.