Vidikron VERSION 50 manual Selecting Video Memory Selecting an Aspect Ratio

Basic Operation

Selecting Video Memory

Selecting an Aspect Ratio

•Press MEM1 to recall custom memory settings.

•Press ISF NT (Night) to recall ISF Night settings.

•Press ISF DAY to recall ISF Day settings.

NOTE: ISF settings must be calibrated and stored by a certified ISF calibrator. For more information, please go to www. imagingscience.com.

•Press DEF (Default) to restore factory settings for the current source. An on- screen confirmation message appears. Press DEF again to confirm.

Select an aspect ratio that suits the format of the video signal. The following aspect ratios are available.

•ANA (Anamorphic): A 4:3 image is stretched horizontally to fit a 16:9 screen. This setting is for 16:9 DVDs and HDTV programs.

•4 X 3 (Standard 4:3): The input signal is scaled to fit a 4:3 display mode in the center of the screen.

•L-BOX (Letterbox): An image in letterbox format is enlarged to fit a 16:9 full screen display; the upper and lower portions are compressed.

•I-WIDE (IntelliWide): This setting transforms a 4x3 image to a 16x9 image.

•CINEMA: The image in the Letterbox mode is enlarged to a 16x9 image and the upper and lower portions are compressed.

•C-FILL (Cinema Fill): A 2.35 image is stretched vertically in both directions to fill a 16:9 image.

30 Vidikron Vision Model 50 Owner’s Operating Manual