Basic Operation
•Press MENU to open or close the
•Use the arrow buttons (▲,◄,▼,►) to select menu items or make adjustments.
•Press ENTER or ► to enter the setting of items in the menu, or press EXIT to leave and save the setting of items in the menu.
For more information on settings, See “On- Screen Display Menus” on page 33.
•When you turn on the projector, it searches for the input source you selected last time.
•You may select the input source directly on the remote control.
•For PIP (Picture In Picture) and PBP (Picture By Picture) purposes, there are two groups of inputs separated by their display modes:
Video group: Video,
Graphic (HD) group: HDMI and RGB/ Component HD inputs.
•PIP / PBP shows one input from the Graphic group within or beside one input from the Video group.
•Press PBP to enable the PBP function. Press PBP again to switch the screens left to right. Press PBP again to turn PBP off.
•Press ACTIVE to switch to the active window. You can only change the input signal settings in the active window.
•Press PIP to enable the PIP function. Press PIP again to switch the main window. Press PIP again to turn PIP off.
•Press PIP+ or PIP- to adjust the size of the PIP window.
•Adjust the position of the PIP window with the arrow buttons (▲,◄,▼,►).
Using the Menus
Selecting the Input Source
PIP / PBP Function
Vidikron Vision Model 50 Owner’s Operating Manual | 31 |