System Administration
View System Configuration and Status
Configuration and Status can be viewed using the Show commands. To view the available show items, use the following command from the CLI:
show ?
Ex: View Current and alternate software versions on the system and the WallPlates:
show system image show system inventory show remote image show remote inventory
T3 OS displays the configuration from the CLI in three useful modes. All configuration displays can be accessed from the “show system config” command syntax.
Summary
Startup
Running
Use the command: show system config summary
This command displays the configuration in an organized summary of each configured feature. Use this output to quickly view the active configuration.
Use the command: show system config startup
Displays only the commands entered by the administrator that result in a configuration change AND have been saved to memory. Use this command to capture an active configuration and create a template for configuring other XLT switches.
Use the command: show system config running
Displays only the commands entered by the administrator that result in a configuration change. The changes may or may not have been saved to memory. Use this command to capture an active configuration and create a template for configuring other switches.
Note: When the commit mode is set to manual, the Running config will be different from the Startup config until the changes are committed.
Motorola, Inc. | Page 24 of 50 | |
|
|
|