Managing the Wireless WallPlates
Per-WLAN Commands
Use the following commands to configure
Command | What it does |
| |
wifi wlan profile add |
| Create a new WLAN by assigning an SSID as a profile name | |
wifi wlan profile config |
| Broadcast SSID: | enable/disable |
|
| Client Isolation: | enable/disable |
|
| Client inactivity timeout: | |
|
| DTIM Period: | |
Wifi wlan profile security |
| None: |
|
|
| (uses 802.1x authentication) | |
|
| Static WEP: | Key length, WEP key, Passphrase, Open or Shared |
|
| ||
|
| version (WPA, WPA2, both), |
Monitor the WLANs and radios
Use the following commands to monitor the configuration and operational status of the WLANs:
Command | What it does |
| |
show wifi wlan |
| Config: | displays administrative status |
|
| Status: | displays operational status |
|
| Statistics: | displays detailed WLAN statistics. Additional options are |
|
|
| general, rate, size and qos |
show wifi wlan profile |
| Config: | displays administrative status |
|
| Status: | displays operational status |
show interface wireless |
| Displays operational status of the wireless radio | |
status |
|
|
|
Show interface wireless |
| Displays detailed statistics of the wireless radio | |
statistics |
|
|
|
show wifi client statistics |
| Displays information about a connected client including MAC address, WLAN, | |
|
| and SSID |
|
Expanded Statistics and Status
Most “show” commands display high level, important information for quick review. To see more detailed status or statistics, specify the actual radio or WLAN. For example;
displays high level status of all active radios | show interface wireless status |
displays detailed status of an individual radio | show interface wireless status radio1 |
Motorola, Inc. | Page 30 of 50 | |
|
|
|