AMD AN9 32X user manual PCI Express X16 Add-on Slots Install Graphics Card

To install system memory:

1.Power off the computer and unplug the AC power cord before installing or removing memory modules.

2.Locate the DIMM slot on the board.

3.Hold two edges of the DIMM module carefully, keep away from touching its connectors.

4.Align the notch key on the module with the rib on the slot.

5.Firmly press the module into the slots

until the ejector tabs at both sides of the slot automatically snap into the mounting notch. Do not force the DIMM module in with extra force as the DIMM module only fits in one direction.

6.To remove the DIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the DIMM module.

※Static electricity can damage the electronic components of the computer or optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly.

2.5.3 PCI Express X16 Add-on Slots (Install Graphics Card)

These slots support the connections of graphics cards that comply with PCI Express specifications. This motherboard provides dual PCI-Express X16 slots for one or two graphics cards installation:

One PCIE graphics card installation (Normal Mode):

Insert your PCIE graphics card into [PCIEXP1] slot.

2-12 AN9 32X