AMD AN9 32X user manual Voltage Monitoring, Bios

-Shutdown Enable

Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature exceeds the shutdown temperature limit, the system will shutdown automatically.

-Shutdown Temp.

This item sets the temperature that will shutdown the system automatically in order to prevent system overheating.

-Beep Enable

Use <Space> key to enable warning beeps function. Once the system has detected that the CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will sound.

-Beep Temp.

This item selects the warning temperature limit.

※The shutdown temperature must be set above the warning temperature.

Voltage Monitoring

Click <Enter> key to enter its submenu:

µGuru Utility V1.00								BIOS
ABIT EQ
Voltage Monitoring
	Reading	Shutdown	Beep	High		Low
		Enable	Enable	Limit		Limit		Setup
(*)CPU Core Voltage	1.40	V (*)	(*)	1.60	V	0	V
(*)DDR2 Voltage	1.80	V ( )	(*)	2.20	V	1.50	V
(*)DDR2 VTT Voltage	0.90	V ( )	(*)	1.10	V	0.75	V
(*)HyperTransport Voltage	1.20	V ( )	(*)	1.45	V	0.95	V
(*)NB Voltage	1.20	V ( )	(*)	1.45	V	0.95	V
(*)CPU VDDA 2.5V Voltage	2.50	V ( )	(*)	3.00	V	2.00	V
(*)SB Voltage	1.50	V ( )	(*)	1.00	V	1.20	V
(*)ATX +12V (24-Pin Connector)	12.00	V ( )	(*)	14.40	V	9.60	V
(*)ATX +12V (4-Pin Connector)	12.00	V ( )	(*)	14.40	V	9.60	V
(*)ATX +5V	5.00	V ( )	(*)	6.00	V	4.00	V
(*)ATX +3.3V	3.30	V ( )	(*)	3.95	V	2.65	V
(*)ATX 5VSB	5.00	V ( )	(*)	6.00	V	4.00	V
↓↑→←:Move Enter:Select +/-/PU/PD:Value			F10:Save ESC:Exit

All Voltages

These items display the voltage of each element.

-Shutdown Enable

Use <Space> key to enable system shutdown function. If the voltage of corresponding element is higher/lower than the high/low limit, the system will automatically shutdown.

AN9 32X 3-5