AMD GA-M61SME-S2 user manual Pwrled, Fpanel Front Panel Jumper

8)PWR_LED

The PWR_LED connector is connected with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode(S1).

1

Pin No.	Definition
1	MPD+
2	MPD-
3	MPD-

9)F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below.

Message LED/

Power/

Sleep LED

Speaker Connector

Power

Switch

	MSG+ MSG- PW+ PW-	SPEAK+	SPEAK-
	2		20
	1		19
	HD+ HD- RES- RES+ NC
	Reset Switch
	IDE Hard Disk Active LED
HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
SPEAK (Speaker Connector)	Pin 1: Power
	Pin 2- Pin 3: NC
	Pin 4: Data(-)
RES (Reset Switch)	Open: Normal
	Close: Reset Hardware System
PW (Power Switch)	Open: Normal
	Close: Power On/Off
MSG (Message LED/Power/Sleep LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
NC	NC

GA-M61SME-S2 Motherboard - 22 -