Onboard Serial Port 2
Auto | BIOS will automatically setup the port 2 address. |
3F8/IRQ4 | Enable onboard Serial port 2 and address is 3F8/IRQ4. |
2F8/IRQ3 | Enable onboard Serial port 2 and address is 2F8/IRQ3. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and address is 3E8/IRQ4. |
2E8/IRQ3 | Enable onboard Serial port 2 and address is 2E8/IRQ3. |
Disabled | Disable onboard Serial port 2. |
Onboard Parallel Port
Disabled | Disable onboard LPT port. |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode
SPP | Using Parallel port as Standard Parallel Port. (Default value) |
EPP | Using Parallel port as Enhanced Parallel Port. |
ECP | Using Parallel port as Extended Capabilities Port. |
ECP+EPP | Using Parallel port as ECP and EPP mode. |
ECP Mode Use DMA
3 | Set ECP Mode Use DMA to 3. (Default value) |
1 | Set ECP Mode Use DMA to 1. |
On-Chip USB
Disabled | Disable this function if you are not using onboard USB function. |
V1.1+V2.0 | Enable USB 1.1 and USB 2.0 controller. (Default value) |
V1.1 | Enable only USB 1.1 controller. |
USB Keyboard Support
Enabled | Enable USB keyboard support. |
Disabled | Disable USB keyboard support. (Default value) |
USB Mouse Support
Enabled | Enable USB mouse support. |
Disabled | Disable USB mouse support. (Default value) |
Legacy USB Storage detect
This option allows users to decide whether to detect USB storage devices, including USB flash drives and USB hard drives during POST.
Enabled | BIOS will scan all USB storage devices. (Default value) |
Disabled | Disable this function. |
| - 38 - |