AMD GA-M61SME-S2 user manual Main Screen of Xpress Recovery2, Limitations, Precautions

Page 53

The Main Screen of Xpress Recovery2

1. RESTORE:

 

Restore the backed-up data to your hard disk.

 

(This button will not appear if there is no backup

 

file.)

 

2. BACKUP:

 

Back up data from hard disk.

 

3. REMOVE:

 

Remove previously-created backup files

 

to release disk space.

 

(This button will not appear if there is no backup

 

file.)

 

4. REBOOT:

 

Exit the main screen and restart the system.

Limitations:

 

1.Not compatible to Xpress Recovery.

2.For the use of Xpress Recovery2, a primary partition must be reserved.

3.Xpress Recovery2 will store the backup file at the end of the hard disk, so free space available on the hard disk for the backup file must be allocated in advance. (A minimum 4GB is recom- mended but the actual space is dependent on the size of the data to be backed up)

4.Capable of backing up hard disks installed with Windows operating systems including DOS and Windows XP/2000/NT/9x/Me.

5.USB hard disks are currently not supported.

6.Does not support RAID/AHCI (class code 0104/0106) hard disks.

7.Capable of backing up and restoring only the first physical hard disk.

Hard disks detection sequence is as follows:

a.PATA IDE primary channel

b.PATA IDE secondary channel

c. SATA IDE channel 1

d.SATA IDE channel 2

e.SATA IDE channel 3

f.SATA IDE channel 4

Precautions:

1.When using hard disks with more than 128G under Windows 2000, be sure to execute the EnableBigLba.exe program from the driver CD before data backup.

2.It is normal that data backup takes longer time than data restoration.

3.Xpress Recovery2 is compliant with the GPL regulations.

4.On a few motherboards based on Nvidia chipsets, BIOS update is required for Xpress Recovery2 to correctly identify RAID and SATA IDE mode. Please contact your motherboard manufacturer.

- 53 -

Appendix

Image 53
Contents GA-M61SME-S2 Motherboard Product Manual Classification CopyrightTable of Contents Regulatory Statements Box Contents GA-M61SME-S2 Motherboard Layout Block Diagram Installation Notices Considerations Prior to InstallationInstances of Non-Warranty Preparing Your ComputerFeature Summary Bios Installation of the CPU Installation of the CPU and CPU CoolerInstallation of the CPU Cooler Installation of Memory Dual Channel Memory Configuration Installation of Expansion CardsGV-RX60P128DE PCI Express x16 Graphics Card Support ListI/O Back Panel Introduction MIC Connectors IntroductionLine Out Front Speaker Out ATX12V/ATX Power Connector IDE IDE Connector Cpufan / Sysfan Cooler Fan Power ConnectorSataii 0 / Sataii 1 Sata 3Gb/s Connectors FDD FDD ConnectorFpanel Front Panel Jumper PwrledFaudio Front Audio Connector Spdifio S/PDIF In/Out Connector Cdin CD In ConnectorFUSB1 / FUSB2 / Front USB Connectors Hdasur Surround Center ConnectorCI Chassis Intrusion, Case Open Comb Comb ConnectorClrcmos Clear Cmos BatteryGA-M61SME-S2 Motherboard Main Menu Status Page Setup Menu / Option Page Setup MenuF12Boot Menu Main Menu For example Bios Ver. E7F12 Boot Menu „ Advanced Bios Features „ Standard Cmos Features„ Power Management Setup „ PnP/PCI ConfigurationIDE Channel 2/3 Master TimeIDE Channel 0 Master, Slave Drive a Floppy 3 Mode Support for Japan AreaHalt on MemoryPassword Check Hard Disk Boot PriorityFirst / Second / Third Boot Device HDD S.M.A.R.T. Capability Away ModeInit Display First Frame Buffer SizeIntegrated Peripherals Onboard LAN Boot ROM IDE Prefetch ModeNV Sata RAID function NV Sata 1 Primary RAIDECP Mode Use DMA Parallel Port ModeOnboard Parallel Port On-Chip USBPower Management Setup Hpet Mode Note Power-On by AlarmPower On By Mouse Power On By KeyboardPCI 2 IRQ Assignment PnP/PCI ConfigurationsPCI 1 IRQ Assignment System/CPU Warning Temperature Current System/CPU TemperatureCase Opened Current VoltageV Vcore/DDR2 1.8V/+3.3V/+12VCPU Smart FAN ControlNote CPU Smart FAN ModeLoad Fail-Safe Defaults Set Supervisor/User Password Exit Without Saving Save & Exit SetupInstall Chipset Drivers Drivers InstallationDriver CD Information Software ApplicationsContact Us Hardware InformationGA-M61SME-S2 Motherboard User Interface Overview Unique Software UtilitiesEasyTune 5 Introduction How to use the Xpress Recovery2 Xpress Recovery2 IntroductionBoot from CD/DVD System requirementsLimitations Main Screen of Xpress Recovery2Precautions Updating the Bios Flash Bios Method IntroductionMethod 1 Q-FlashTM Before UseCopy Bios completed Pass Please press any key to continue Methods and steps Method 2 @BIOSTM UtilityPage Before you begin Installing Sata hard drives in your computerShadow Step Save and exit Bios Setup GA-M61SME-S2 Motherboard Configuring RAID set in RAID Bios YES BBS Making a Sata Driver Disk Cd bootdrv MenuInstalling Sata controller driver during OS installation ENTER=Select F3=Exit Enter= Continue R=Repair F3=Exit Audio Jacks Introduction Installing the 5.1/7.1 Surround Cable Optional5 2- / 4- / 6- / 8- Channel Audio Introduction HD Audio Setting Up Stereo SpeakersSetting Up 4-Channel Audio Setting Up 6-Channel Audio Setting Up 8-Channel Audio Sound Effect Configuration Frequently Asked Questions TroubleshootingStart Troubleshooting ProcedureEND Our Commitment to Preserving the Environment Weee Symbol StatementRegulatory Notices China Restriction of Hazardous Substances Table Taiwan Headquarters Contact UsPoland Ukraine Romania Serbia & Montenegro Gigabyte Global Service System