AMD XP-K7S748 user manual Standard Cmos Features, Date mmddyy, Time hhmmss

English

<F6>	Gives the list of options available for each item
<F7>	Return to Optimized default values (not applicable to main
	setup screen)
<F8>	Enters BIOSNow! feature
<F9>	Displays system information
<F10>	Saves settings and exits setup

3.2.Standard CMOS Features

øIncludes the settings for items such as date, time, floppy disk drive specifications, and hard drives connected to the IDE interface.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Standard CMOS Features

	Date (mm:dd:yy)		Sat, May 15 2004		Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level}
					Change the day, month,
}	IDE Primary Master		[None]		year
}	IDE Primary Slave		[None]
}	IDE Secondary Master		[None]		<Week>
}	IDE Secondary Slave		[None]		Sun. to Sat.
	Drive A		[1.44M, 3.5"]		<Month>
	Drive B		[None]		Jan. to Dec.
	Floppy 3 Mode Suport		[Disabled]		<Day>
	Holt On		[All, But Keyboard]		1 to 31 (or maximum
	Base Memory		640K		allowed in the month)
	Extended Memory		127M		<Year>
	Total Memory		128M		1999 to 2098
	higf: Move	Enter: Select	+/-/PU/PD: Value F10: Save	ESC: Exit		F1: General Help
		F5: Previous Values	F6: Fail-Save Default	F7: Optimized Defaults

nDate (mm:dd:yy)

Allows you to setup the date in the mm:dd:yy fashion.

nTime (hh:mm:ss)

Allows you to set up the date in the hh:mm:ss fashion. The time must be entered in the 24-hour format.

nIDE Primary Master(Slave) / IDE Secondary Master(Slave)

[IDE Device Setup]

IDE HDD Auto-Detection	Press "Enter" to select this option for automatic device
detection.

IDE Primary Master(Slave) / IDE Secondary Master(Slave) IDE Device Setup. You can use one of three methods:

Auto	Allows BIOS to automatically detect IDE devices during POST(default)
None	Select this if no IDE devices are used and the system will skip the
	automatic detection step and allow for faster system start up.
Manual	User can manually input the correct settings
Access Mode	Use this to set the access mode for the hard drive. The four options are:
	CHS/LBA/Large/Auto(default:Auto)

Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.

12