AMD XP-K7S748 user manual Integrated Peripherals

3.4.Integrated Peripherals

øThis menu allows you to control the various ports of the computer such as IDE, SATA,

USB, IEEE1394, COM port, LPT port, AC97 audio, etc.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Integrated Peripherals

IDE1 Conductor Cable		[Auto]			Item Help
IDE2 Conductor Cable		[Auto]			Menu Level}
On-Chip Primary PCI IDE		[Enabled]
On-Chip Secondary PCI IDE		[Enabled]			[Auto]
AC97 Audio		[Enabled]			Auto-detect IDE
Onboard LAN device		[Enabled]			cable type
USB Controller		[Enabled]
USB Legacy Support		[Disabled]			[ATA66/100/133]
Onboard Serial Port 1		[3F8/IRQ4]			Set conductor cable
Onboard Serial Port 2		[2F8/IRQ3]			to ATA66/100/133 (80
Onboard Parallel Port		[378/IRQ7]			pins)
Parallel Port Mode		[SPP]
x ECP Mode Use DMA		3			[ATA33]
					Set conductor cable
					to ATA33 (40 pins)
higf: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit		F1: General Help
	F5: Previous Values	F6: Fail-Save Default		F7: Optimized Defaults

nIDE1 Conductor Cable

Allows user to select the type of IDE1 conductor cable. Prior to selecting the setting, please make sure that the IDE device and cables support the desired setting.

Options: Auto, ATA66/100, ATA33 (default:Auto)

nIDE2 Conductor Cable

Allows user to select the type of IDE2 conductor cable. Prior to selecting the setting,

please make sure that the IDE device and cables support the desired setting.

Options: Auto, ATA66/100, ATA33 (default:Auto)

nOn-Chip Primary PCI IDE

Allows the user to enable or disable the first onboard IDE channel. (default:Enabled)

nOn-Chip Secondary PCI IDE

Allows the user to enable or disable the second onboard IDE channel. (default:Enabled)

nAC97 Audio

Allows the user to use the onboard AC97 audio (default:Enabled)

nOnboard LAN device

Allows the user to enable or disable the onboard LAN (default:Enabled)

nUSB Controller

Allows the user to enable or disable the onboard USB2.0 controller. (default:Enabled)

English

15