Power Management Setup | AMD XP-K7S748 specification

3.5.Power Management Setup

øThis is used to control the various power saving features of the PC.

Power Management Setup


	ACPI Suspend Type		[S1(POS)]		Item Help
	Soft-Off by PWR_BTTN		[Off]		Menu Level}
	System After AC Back		[Off]
	IRQ [3-7, 9-15], NMI		[Enabled]		[S1]
	ModemRingOn		[Enabled]		Set suspend type to
	PME Event Wake Up		[Enabled]		Power On Suspend under
	Power On by Keyboard		[Disabled]		ACPI OS
	Power On by Mouse		[Disabled]
	Resume by Alarm		[Disabled]		[S3]
x	Month Alarm		NA		Set suspend type to
x	Day (of Month)		Everyday		Suspend to RAM under
x	Time (hh:mm:ss)		0 0 0		ACPI OS
	Power LED in S1 state		[Blinking]

	higf: Move	Enter: Select	+/-/PU/PD: Value F10: Save	ESC: Exit		F1: General Help
		F5: Previous Values	F6: Fail-Save Default	F7: Optimized Defaults

nACPI Suspend Type

Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)

nSoft-off by PWR_BTTN

Controls whether the PC shuts off immediately after hitting the power button or delaying a few seconds. (default:Off)

Options: Off (PC shuts off immediately)

Suspend (Press power button 4 sec to power off. Enter suspend if button is pressed less than 4 sec)

nSystem After AC BACK

Allows user to select system status when power is removed and returned.

Options: Off (Always in off state when AC back)

On (Always power on system when AC back)

Laststate (System power on depends on the status before AC lost) (default:Off)

nIRQ [3-7, 9-15], NMI

When IRQ [3-7, 9-15] or NMI triggered, the suspend timer will be reloaded to prevent system gets into green mode. (default:Enabled)

nModemRingOn

To use this feature, an Ethernet card supporting the PCI2.2 or newer standard must be used. (default:Enabled)

nPME Event Wake Up

Allows user to select the Power Management Event (PME) wake up function which requires the system to have a +5VSB power supply using a rate of 1A or less. (default:Enabled)

English