AMD N2PAP-LITE, N2PA-LITE Connectors, Headers, AGP Slot, Power Connector 20-pin block PWR

2-5-4 AGP Slot

The motherboard provides an AGP Slot, supporting the 4X/8X AGP VGA card.

AGP SLOT

2-6 Connectors, Headers

2-6-1 Connectors

(1)Power Connector (20-pin block) : PWR

ATX power supply connector. This is a newly defined 20-pins connector that usually comes with ATX case. The ATX power supply allows the use of soft power on momentary switch that connects from the front panel switch to 2-pins power-on jumper pole on the motherboard. When the power switch on the back of the ATX power supply is switched on, the full power will not come into the system board until the front panel switch is momentarily pressed. Press this switch again will turn off the power to the system board.

PIN	ROW2	ROW1
1	3.3V	3.3V
2	-12V	3.3V
3	GND	GND
4	Soft Power On	5V
5	GND	GND
6	GND	5V
7	GND	GND
8	-5V	Power OK
9	+5V	+5V (for Soft Logic)
10	+5V	+12V

Pin 1

(2)PS/2 Mouse & PS/2 Keyboard Connector: KYB The connectors for PS/2 keyboard and PS/2 mouse.

(3)USB Port connector: USB

The connectors are 4-pin connector that connect USB devices to the system board.

(4)LAN Port connector: LAN (for N2PAP-LITE only) This is a standard RJ45 connector for network connection

12