AMD N2PA-LITE, N2PAP-LITE user manual Integrated Peripherals

CAS Latency

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The settings are: 2T and 2.5T.

System BIOS Cacheable

Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The settings are: Enabled and Disabled.

Video RAM Cacheable

Select Enabled allows caching of the video BIOS, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The settings are: Enabled and Disabled.

Frame Buffer Size

You can choose the onboard VGA memory size shared from system memory. The settings are: 8M, 16M, 32M, 64M, Disabled.

3-7 Integrated Peripherals

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software

Integrated Peripherals

> Onboard IDE Function		Press	Enter	Item Help
> Onboard Device Function	Press		Enter
> Onboard Super IO Function	Press Enter
Init Display First	PCI Slot			Menu Level >
Power On Function	Button		Only
X KB Power On Password	Enter
X Hot Key Power On	Ctrl+F1		off
Power Loss Function	Always

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

Onboard IDE Function

Please refer to section 3-7-1

Onboard Device Function

Please refer to section 3-7-2

Onboard Super IO Function

Please refer to section 3-7-3

Init Display First

This item selects to activate PCI Slot or AGP VGA first. The settings are: PCI Slot, AGP Slot.

Power Loss Function

This item allows the system to power ON/OFF automatically when power recovery again after previous power loss. You can choose Auto to recover to pre-state, or always ON/OFF after power recovery.

25