3-11 Miscellaneous Control
This section provides options for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C)
Miscellaneous Control
** Current Host Clock is | 100MHz | Item Help |
Host Clock at Next Boot is | ||
** Current DRAM Clock is |
|
|
DRAM Clock at next Boot is | 133MHz | Menu Level > |
CPU Ratio Select | Default | |
Core_VDD Select | 1.7V(Default) |
|
VDD_AUXC Select | 1.6V(Default) |
|
VAGP Output | 1.5V(Default) |
|
VRAM Output | 2.6V(Default) |
|
VAUX Output | Default |
|
VTT Voltage | 1.25V |
|
VAGP LUV Protect | Enabled |
|
VRAM LUV Protect | Enabled |
|
Dual3.3V LUV Protect | Disabled |
|
Flash Parts Write Protect | Enabled |
|
↑↓→← Move Enter:Select
F5:Previous Values | F6:Optimized Defaults | F7:Standard Defaults |
Host Clock at next Boot is
This item allows you to select CPU frequency at preset values.
The choices are: 100MHz, 133MHz, 166MHz, 200MHz, 236MHz, 240MHz, 242MHz, 244MHz, 245MHz, 250MHz
DRAM Clock at next Boot is
This field supports the capability of setting the memory modules clocks that you can use.
The choice is either 100MHz, 110MHz, 125MHz, 133MHz, 138MHz, 166MHz, 200MHz, 208MHz, 221MHz, 249MHz
CPU Ratio Select
This item allows you to select Ratio of the CPU. The choice are:X5~X24
VDD AUXC Select
This item allows you to select Chip Voltage. The choice are 1.6V(Default), 1.7V
VAGP Output
This item allows you to select 1.5V voltage of the AGP VGA card. The choice are: 1.5V, 1.6V,1.7V
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are: 2.5V~ 3.0V.
VAUX Output
This item allows you to select AUX voltage. The choice are: Default, 2%, 4%, 8%,12%, 16%.
VTT Voltage
This item allows you to select VTT voltage. The choice are: 1.25V, VDIMM/2.
VAGP/VRAM LUV Protect
This item allows you to enable the protective function on motherboard when over current presents. The choice are: Enabled(Default), Disabled
Flash Parts Write Protect
This item allows you to protect BIOS against the data crash of virus. The choice are: Enabled, Disabled. Before flash BIOS you have to change the setting to Disabled, otherwise you can not flash BIOS.
32