Analog Devices ADSST-SALEM-3T Absolute Maximum RATINGS-ADSST-73360LAR, Parameter Rating

Page 14

ADSST-SALEM-3T

ABSOLUTE MAXIMUM RATINGS—ADSST-73360LAR

(TA = 25°C unless otherwise noted)

Table 8.

Parameter

Rating

 

 

AVDD, DVDD to GND

–0.3 V to +4.6 V

AGND to DGND

–0.3 V to +0.3 V

Digital I/O Voltage to DGND

–0.3 V to DVDD + 0.3 V

Analog I/O Voltage to AGND

–0.3 V to AVDD

Operating Temperature Range

0°C to +70°C

Storage Temperature Range

–65°C to +150°C

Maximum Junction Temperature

150°C

Thermal Impedance θJA (SOIC)

75°C/W

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.

Rev. 0 Page 14 of 24

Image 14
Contents General Description FeaturesParameter Each Phase Total High accuracyADSST-SALEM-3T Table of Contents Ease of Design Effective Phase CompensationEasy Calibration Quadrant and Other ConventionsArchitecture Overview ADSST-SALEM-3TGeneral Description of the ADSST-218X DSP Serial Ports Function ADSST-218X COMMON-MODE PinsPin Name No. of Pins Recommended Operating Conditions Clock SignalsReset Parameter Min Max UnitADSST-SALEM-3T ADSST-218X Electrical Characteristics Parameter Test Conditions Min Typ Max UnitRating ADSST-SALEM-3T Absolute Maximum RATINGS-ADSST-218XESD Caution Parameter Min MaxADSST-SALEM-3T PIN CONFIGURATION-ADSST-218X ADSST-218xGeneral Description of the ADSST-73360LAR ADC ADSST-73360LARADSST-SALEM-3T SPECIFICATIONS-ADSST-73360LAR Parameter Min Typ Max Unit Test ConditionsDigital Current Conditions Max mA CommentsADSST-SALEM-3T Absolute Maximum RATINGS-ADSST-73360LAR Parameter RatingPIN Function Descriptions Pin No Mnemonic FunctionGrounding and Layout Ground Plane LayoutPotential Section Current Voltage Min Typ Parameter Nominal ValueCurrent Voltage Min Typ Max Unit Voltage CurrentMax Unit Current VoltageMinTyp Min Typ ADSST-SALEM-3T Outline Dimensions View aPart Number1 Temperature Range Processors Included Package Ordering GuideRev Page 22 Rev Page 23 Rev Page 24