Alcatel-Lucent 6850-P24X, 6850-48L, 6850-P48X manual Setting Up the Switch, Airflow Considerations

Page 10

4Carefully remove any foam pads and protective plastic from the switch chassis.

Note. Alcatel-Lucent provides factory-installed blank cover plates for empty backup power supply or 10-Giga- bit expansion module bays. Do not remove these cover plates unless a backup power supply or expansion module is to be installed immediately at the corresponding bay.

5If you are installing multiple switches in a stacked configuration, repeat steps 1 through 4 for the remaining switches that will make up the stack.

6Once all OmniSwitch 6850 Series switches have been removed from their packaging, continue to “Setting Up the Switch.”

Setting Up the Switch

Note. Due to their airflow and access requirements, OmniSwitch 6850 Series switches cannot be wall- mounted.

Airflow Considerations

Be sure that your switch is placed in a well-ventilated, static- free environment. Always allow adequate clearance at the front, rear, and sides of the switch.

The following diagram shows recommended minimum clear- ances for adequate chassis airflow and access to components at the rear of the chassis:

Rear. 5 inches minimum at rear of chassis.

Sides. 2 inches minimum at left and right sides for chassis airflow.

Front. 6 inches minimum at front of chassis for cable access and LED visibility.

Chassis Top View

6 Installing the Hardware

June 2007

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OmniSwitch 6850 Series Patent No ,542,507 Table of Contents June OmniSwitch 6850 Series Related Documentation Items Required Installing the HardwareSite Preparation Weight Considerations Unpacking the Chassis Unpacking and Initial SetupItems Included RecommendationsSetting Up the Switch Airflow ConsiderationsInstalling the Switch on a Tabletop or Bench Installation OptionsTabletop Mounting Steps Rack-Mounting the Switch Rack Mounting StepsAttaching the Switch to the Rack Installing Combo Port SFPs Installing Backup Power Supply ComponentsConnecting the Serial Cable Serial Connection Default SettingsConnections and Cabling Booting OmniSwitch 6850 Series Switches Booting a Standalone SwitchJune Your First Login Session Logging in to the SwitchAssigning an IP Address to the Switch Unlocking All Session Types Unlocking Session TypesUnlocking Specified Session Types Changing the Login Password Setting Optional System Information Setting the System Time ZoneSetting the Date and Time Specifying an Administrative ContactViewing and Saving Changes Specifying the Switch’s LocationSpecifying a System Name Boot.cfg File Boot.params FileFiles and Directories Image Files Working and Certified Directories Working DirectoryCertified Directory Certified DirectoryCan I save changes to the Certified directory? What happens when the switch boots?Working and Certified Are Identical Working and Certified Are Different Working DirectoryLogging In to WebView Using WebViewBrowser Compatibility Navigating WebView Main Configuration Group Toolbar Online Help Additional InformationTroubleshooting Login screen displays, but the login fails

6850-24, 6850-P24X, 6850-P48X, 6850-P48L, 6850-48 specifications

The Alcatel-Lucent 6850 series switches, comprising the 6850-U24X, 6850-48X, 6850-P24, 6850-P48, and 6850-P24L, represent a key advancement in network infrastructure solutions, delivering reliable performance and flexibility for various enterprise networking environments. These switches are designed to meet the needs of both wired and wireless networks, offering an array of features tailored for modern data traffic demands.

One of the standout features of the 6850 series is its Layer 2 and Layer 3 capabilities, allowing for advanced VLAN management and routing functionalities. This ensures seamless communication across multiple devices and subnets while improving overall network efficiency. The switches support a variety of routing protocols such as OSPF, RIP, and PIM, facilitating optimized path selection and load balancing.

The 6850-U24X model features 24 ports with 10 Gigabit Ethernet capabilities, enabling high-speed connections for bandwidth-intensive applications. The 6850-48X, on the other hand, boasts 48 ports, accommodating larger connectivity needs without compromising performance. Meanwhile, the 6850-P24 and 6850-P48 variants are geared towards Power over Ethernet (PoE) applications, providing up to 30W per port to power devices like IP cameras and wireless access points, simplifying installations.

Another key characteristic of the 6850 series is its energy efficiency. These switches incorporate intelligent power management features that help organizations reduce their carbon footprint and operational costs. This is further enhanced by the switches' ability to support Energy Efficient Ethernet (EEE), leading to reduced power consumption during low-traffic periods.

The series also supports advanced security features, including Access Control Lists (ACLs), DHCP snooping, and dynamic ARP inspection, which collectively protect against unauthorized access and cyber threats. The built-in redundancy features, such as link aggregation and Spanning Tree Protocol (STP), ensure high availability and network resilience.

In terms of software capabilities, the Alcatel-Lucent 6850 switches are compatible with the Nuage Networks SD-WAN solutions, enabling organizations to leverage software-defined capabilities for greater agility and simplified network management. Furthermore, the switches support flexible stacking options, allowing multiple units to operate as a single logical entity, enhancing scalability and simplifying management.

Overall, the Alcatel-Lucent 6850 series switches offer a balanced blend of performance, flexibility, and security, making them an ideal choice for enterprises looking to enhance their networking capabilities. Their comprehensive feature set positions them as robust solutions for managing contemporary networking challenges.
Top Page Image Contents