All surfaces that are used for intentionally grounding the EUT | Weight Considerations | |
shall be brought to a bright finish and an anti oxidant solution | A single OS6850 weighs approximately 14 lbs | |
must be applied to the surfaces being joined. | ||
(6.24 Kgs). A stack of eight OS6850 switches weighs | ||
approximately 112 lbs (50 Kgs). | ||
removed from threads and other contact surfaces to assure |
| |
electrical conductivity. |
| |
(Thread forming screws with paint piercing washers may be |
| |
used for this purpose during installation) |
| |
Warning. The |
| |
including Gigabit Ethernet, are suitable for connection to |
| |
| ||
shielded and grounded cables at both ends. The |
| |
ports of the equipment must not be metallically connected to |
| |
interfaces that connect to the OSP or its wiring. |
| |
|
|
|
| Note. All bare conductors must be coated with an appro- |
|
| priate antioxidant compound before crimp connections are |
|
| made. All unplated connectors, braided strap, and bus bars |
|
| are to be brought to a bright finish and then coated with an |
|
| antioxidant before connecting them. |
|
|
|
|
4 Installing the Hardware | June 2007 |