Your First Login Session
Once the switch or stack has successfully booted and you have accessed your computer’s terminal emulation software via the console port, you are ready to log in to the switch’s Command Line Interface (CLI) and configure basic information.
Complete the following steps during your first login session:
•Log in to the switch or stack
•Unlock session types
•Change the login password
•Set the date and time
•Set optional system information
•Save your changes
Note. You must be connected to the switch via the console port before initiating your first login session. If you are using OmniSwitch 6850 Series switches in a stacked configuration, you must be connected to the console port of the stack’s primary switch.
Logging in to the Switch
When you first log in to the switch or stack, you will be prompted for a login (i.e., user) name and password. During this first login session, only one user name option and one password option is available:
•Login (i.e., user
•
To log in to the switch or stack, enter admin at the login prompt:
login: admin
Next, enter the factory default password, switch, at the pass- word prompt:
password: switch
14 Your First Login Session | June 2007 |