Airlink101 ANAS550 user manual LED Indicators

Page 4

•Automatic E-mail Alert system

•Support UPnP AV Server for windows XP

•Support NTP Server for system time synchronization

1.3LED Indicators

1.Power LED – The steady Blue light indicates the server is powered on. This LED will be off when the 2-Bay NAS is on power saving mode.

2.HDD 1/2 LED – The steady Blue light indicates the hard disk drive(s) is connected but inactive. When it blinks, the hard disk drive(s) is reading/writing data. The steady Orange light indicates the hard disk drive(s) failed.

3.LAN LED – The steady Blue light confirms that the server has a good connection to your network. When it blinks, the 2-Bay NAS is receiving/transmitting data from/to the network.

4.Power Button – Press once to power on. Press and hold the button for 5 seconds to power off.

4

Image 4

Contents User’s Manual Table of Contents Features Package ContentsIntroduction LED Indicators Installing 2-Bay NAS Installing Hard DrivesCongratulations! The hard drive installation is complete Configuring 2-Bay NAS Page Method B Using your web browser Internet Explorer or Firefox Page Accessing 2-Bay NAS Method 1 Using the host name ANAS550All Programs Airlink101 Airlink101 2-Bay NAS Utility Page Page Using Web Configuration Setup WizardPage Page Page Setup LAN Setup DevicePage Advanced Advanced UserAdvanced Group Advanced Network Access Advanced QuotasPage Advanced FTP Server Advanced UPnP AV Server ITunes Server Select Enable or Disable for the function Dhcp Server Select Enable or Disable for the function Tools Admin Tools TimeTools System Tools Firmware Tools Email Alerts Tools Power Management Tools RAID Status Device InfoSupport Downloading/Backing up Files Through 2-Bay NAS Scheduling Status SupportSpecifications LEDTechnical Support Mailsupport@airlink101.com