Airlink101 ANAS550 user manual Congratulations! The hard drive installation is complete

Page 6

Step 4 Replace the front panel onto the server.

Step 5 Plug an Ethernet cable to the LAN port located on the rear panel, and then connect it to your switch or router.

Step 6 Plug the AC power adapter to the power connector located on the rear panel, and connect it to a power outlet.

Step 7 Press the power button to turn on the 2-Bay NAS. Verify the

Power, HDD and LAN are lit. The HDD LED only lit up when the hard drive is properly installed.

Congratulations! The hard drive installation is complete!

6

Image 6

Contents User’s Manual Table of Contents Package Contents FeaturesIntroduction LED Indicators Installing 2-Bay NAS Installing Hard DrivesCongratulations! The hard drive installation is complete Configuring 2-Bay NAS Page Method B Using your web browser Internet Explorer or Firefox Page Accessing 2-Bay NAS Method 1 Using the host name ANAS550All Programs Airlink101 Airlink101 2-Bay NAS Utility Page Page Using Web Configuration Setup WizardPage Page Page Setup LAN Setup DevicePage Advanced Advanced UserAdvanced Group Advanced Network Access Advanced QuotasPage Advanced FTP Server Advanced UPnP AV Server ITunes Server Select Enable or Disable for the function Dhcp Server Select Enable or Disable for the function Tools Admin Tools TimeTools System Tools Firmware Tools Email Alerts Tools Power Management Tools RAID Status Device InfoSupport Downloading/Backing up Files Through 2-Bay NAS Scheduling Status SupportSpecifications LEDTechnical Support Mailsupport@airlink101.com