AMX MVP-5200i manual Commands

Programming

Page Commands

These Page Commands are used in NetLinx Programming Language and are case insensitive.

Page Commands

@APG	Add the popup page to a group if it does not already exist. If the new popup is added to a
Add a specific	group which has a popup displayed on the current page along with the new pop-up, the
	displayed popup will be hidden and the new popup will be displayed.
popup page to a
	Syntax:
specified popup
group.	"'@APG-<popup page name>;<popup group name>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	popup group name = 1 - 50 ASCII characters. Name of the popup group.
	Example:
	SEND_COMMAND Panel,"'@APG-Popup1;Group1'"
	Adds the popup page ’Popup1’ to the popup group ’Group1’.
@CPG	Syntax:
Clear all popup	"'@CPG-<popup group name>'"
pages from	Variable:
specified popup
	popup group name = 1 - 50 ASCII characters. Name of the popup group.
group.
	Example:
	SEND_COMMAND Panel,"'@CPG-Group1'"
	Clears all popup pages from the popup group ’Group1’.
@DPG	Syntax:
Delete a specific	"'@DPG-<popup page name>;<popup group name>'"
popup page from	Variable:
specified popup
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
group if it exists.
	popup group name = 1 - 50 ASCII characters. Name of the popup group.
	Example:
	SEND_COMMAND Panel,"'@DPG-Popup1;Group1'"
	Deletes the popup page ’Popup1’ from the popup group ’Group1’.
@PDR	If the flag is set, the popup will return to its default location on show instead of its last drag
Set the popup	location.
location reset flag.	Syntax:
	"'@PDR-<popup page name>;<reset flag>'"
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed
	On.
	reset flag = 1 = Enable reset flag
	0 = Disable reset flag
	Example:
	SEND_COMMAND Panel,"'@PDR-Popup1;1'"
	Popup1 will return to its default location when turned On.

104 MVP-5200i Modero Viewpoint Widescreen Touch Panel