AMX MVP-5200i manual Wireless Settings Wireless Access Overview, Setting the Panel’s Device Number

Configuring Communication

Setting the Panel’s Device Number

In the Protected Setup page:

1.Press the Device Number field in the Device ID section to open the Device Number keypad.

2.Enter a unique Device Number assignment for the device, and press Done to return to the Protected Setup page. The Device Number range is 1 - 32000, and the default is 10001.

3.Press Reboot to reboot the device and apply the new Device Number.

Wireless Settings - Wireless Access Overview

DHCP

When choosing DHCP, a DHCP server must be accessible before the fields are populated.

If the SSID (Network Name) and WEP fields have not previously been configured, the

Wireless Settings page will not work until the panel is rebooted.

The parameters of the wireless card must be set before selecting Ethernet as the Master Connection

Type. The Wireless Access Point communication parameters must match those of the pre-installed wireless CF card inside the device.

MVP touch panels connect to a wireless network through their use of the pre-installed AMX 802.11g wireless interface card. This allows users to communicate with a Wireless Access Point (WAP). The WAP communication parameters must match those of the pre-installed wireless interface card installed within the panel. This internal card transmits data using 802.11x signals at 2.4 GHz. For a more detailed explanation of the new security and encryption technology, refer to the Appendix B: Wireless Technology section on page 166.

For more information on utilizing the AMX Certificate Upload Utility in conjunction with the EAP security, refer to the AMX Certificate Upload Utility section on page 173.

24 MVP-5200i Modero Viewpoint Widescreen Touch Panel