AMX instruction manual Programming, AXC-232++ SendCommands

Programming

Programming

Send_Commands

The AXC-232++ supports the same command set as the AXC-232. Figure 20 lists the AXC-232++

Send_Commands.

AXC-232++ Send_Commands

B9MOFF	Syntax:
Sets data bit mode to normal	'B9MOFF'
with DIP switch settings	Example:
(default).
	SEND_COMMAND AXC232,'B9MOFF'
	Sets the data bit mode to normal.
B9MON	Syntax:
Enables a special mode to	'B9MON'
override DIP switch settings.	The mode, nine data bits with one stop bit, overrides the data, stop, and parity
	settings. When the AXC-232++ issues this command, it locks in the baud rate
	determined by the current DIP switch setting.
	Example:
	SEND_COMMAND AXC232,'B9MON'
	Overrides the DIP switch settings.
BAUDHIGH	Syntax:
Enables 115,200 baud rate	'BAUDHIGH'
when the DIP switch is set to	Example:
300 baud.
	SEND_COMMAND AXC232,'BAUDHIGH'
	Enables 115,200 baud rate.
BAUDLOW	Syntax:
Enables 300 baud rate when	'BAUDLOW'
the DIP switch is set to 300	Example:
baud setting (default).
	SEND_COMMAND AXC232,'BAUDLOW'
	Enables 300 baud rate.
BAUDMED	Syntax:
Enables 57,600 baud rate	'BAUDMED'
when the DIP switch is set to	Example:
300 baud.
	SEND_COMMAND AXC232,'BAUDMED'
	Enables 57,600 baud rate.
CB1ON	Syntax:
Enables placement of charac-	'CB1ON'
ters in the buffer specified by	Example:
CREATE_BUFFER 1
	SEND_COMMAND AXC232,'CB1ON'
(default).
	Enables placement of characters in the buffer.
CB1OFF	Syntax:
Disables placement of char-	'CB1OFF'
acters in the buffer specified	Example:
by CREATE_BUFFER 1.
	SEND_COMMAND AXC232,'CB1OFF'
	Disables placement of characters in the buffer.

AXC-232++ RS-232/422/485 Interface Card 9