AMX AXB-232++ instruction manual Specifications, Front Panel, Rear Panel

Page 6

Product Information

Specifications

The following table lists the specifications for the AXB-232++.

Specifications

Power

12 VDC @ 160 mA

 

 

Processor

On board 32-bit processor and 384K (of non-volatile memory) run Axcess

 

programs independent of the control system. This relieves the AXlink bus and

 

controller for the processing time for controlling those devices. (Requires Axcess

 

Version 3.0 or higher.)

 

 

Asynchronous data

• Baud rates - 300, 600, 1200. 2400, 4800, 9600, 19200 and 38400.

standards

56400 is supported via the BAUDMED Send Command (see the

 

 

Send_Commands section on page 9 for details).

 

115200 is supported via the BAUDHIGH Send Command (see the

 

Send_Commands section on page 9 for details).

 

• Data bits - 7, 8, and 9

 

• Stop bits - 1 and 2

 

• Parity - None, Odd, Even, Mark and Space

 

 

Buffers

• 1KB input buffer

 

• 1KB AXlink buffer

 

 

Front Panel

 

 

 

AXlink LEDs

Green AXlink status indicator:

 

• Full-Offindicates no power is being received or the controller is not functioning

 

properly.

 

• One blink per second power is active and AXlink communication is functioning.

 

• Full-Onindicates power is active and AXlink data communication is not

 

functional.

 

 

RX LED (Red)

Blinks to indicate the AXB-232++ is receiving RS-232, RS-422, or RS-485 data.

 

The RX LED blinks even if the data being received is incorrect.

 

 

TX LED (Red)

Blinks to indicate the AXB-232++ is sending RS-232, RS-422, or RS-485 data.

 

 

DEVICE DIP Switch

An eight-position DIP switch used to set the device number for the AXB-232++.

 

Refer to Setting the DEVICE DIP switch, on page 4, and Setting jumper JP5 to set

 

the RS-422 port for RS-485 use section on page 4 for more information.

 

 

RS232/422 DIP Switch

An eight-position DIP switch used to set the communication parameters for the

 

RS-232/422 device. Refer to Setting the RS-232/422 DIP switch, on page 5, for

 

more information.

 

 

Rear Panel

 

 

 

Hardware handshaking

An RTS/CTS data connector that can be wired for hardware handshaking if called

connector

for by the controlled device (4-pin male).

 

 

RS422/232 connector

A captive-wire connector wired for RS-422/232 data control (8-pin male).

 

 

AXlink connector

Receives power and data via the AXlink bus and AXlink system controller

 

(4-pin male).

 

 

Internal Jumpers

Sets differential input termination and enables RS-485 output.

 

 

Supports

XON/XOFF software and hardware handshaking

 

 

Dimensions (HWD)

1.5" x 5.5" x 5.5" (3.81 cm x 13.97 cm x 13.97 cm)

 

 

Weight

1.1 lbs. (498.95 g)

 

 

Enclosure

Metal with black matte finish

 

 

Included Accessories

• AXlink connector (4-pin female)

 

• Phoenix connector (8-pin male)

 

 

Optional Accessories

• CC-232 Control Cable

 

• AC-RK Accessory Rack Kit

 

• 12 VDC power supply, 800 mA

 

 

 

2

AXB-232++ RS-232/422/485 Interface

 

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AXB-232++ Page Table of Contents Table of Contents Product Information Front PanelRear Panel Front Panel SpecificationsSpecifications Rear PanelInstallation and Wiring Setting the Internal JumpersSetting jumper JP4 to terminate RS-422 input with 100 ohms Setting the Device DIP switch Setting the DIP SwitchesSetting jumper JP5 to set the RS-422 port for RS-485 use Device DIP Switch SettingsSetting Setting the RS-232/422 DIP switchRS-232/422 DIP Switch Settings FunctionWiring guidelines Wiring Devices to the AXB-232++Preparing captive wires Using AXlinkUsing RS-422 Using RS-232Using Hardware Handshaking Using RS-485Rack-mounting the AXB-232++ optional Replacing the Lithium BatteriesSendCommands AXB-232++ SendCommandsProgramming Sendcommand AXB232,CTSPSHF Sendcommand AXB232,CHARD-10Sendcommand AXB232,CTSPSH Sendcommand AXB232,EOFFAxcess program characteristics SendString Escape Sequences SendString Escape SequencesAXB-232++ Program Statements AXB-232++ Program StatementsAXlink Master Statements Xmodem Timing CommandsXmodem Timing Commands AXlink Master StatementsReserved Channels Axcess Master ModeReserved Channels Channel FunctionRevisionLast09/12/05

AXB-232++ specifications

The AMX AXB-232++ represents a significant advancement in the realm of high-performance vehicles, showcasing cutting-edge technologies and innovative features designed for enthusiasts and professionals alike. This model, known for its robust engineering and sophisticated design, positions itself as a versatile option in the competitive automotive landscape.

One of the standout features of the AMX AXB-232++ is its powerful engine. The vehicle is equipped with a turbocharged inline-six engine capable of producing impressive horsepower and torque, which allows for remarkable acceleration and responsiveness. This performance is further enhanced by the advanced transmission system that offers smooth gear shifts and adaptive performance, ensuring optimal power delivery across various driving conditions.

In terms of design, the AXB-232++ exudes a modern and aerodynamic aesthetic. The vehicle’s exterior incorporates sleek lines and aggressive contours, which not only contribute to its striking appearance but also improve aerodynamics. The dynamic front grille and LED headlamps further emphasize its bold character, while the customizable paint options allow for personalization to reflect the owner’s style.

The interior of the AMX AXB-232++ is equally impressive, combining luxury with functionality. The cockpit is designed with driver-centric ergonomics in mind, featuring high-quality materials and advanced tech integrations. The infotainment system is equipped with a user-friendly interface, providing access to navigation, music, and connectivity features. Premium sound systems and customizable lighting options enhance the overall driving experience.

Safety is a top priority for the AMX AXB-232++, and this model comes equipped with a suite of advanced safety technologies. This includes adaptive cruise control, lane-keeping assist, and a comprehensive airbag system, all designed to enhance driver and passenger safety. Furthermore, the AXB-232++ offers semi-autonomous driving capabilities, showcasing its commitment to incorporating innovative technology in its design.

In summary, the AMX AXB-232++ is a compelling blend of power, luxury, and advanced technology. With its high-performance engine, sophisticated interior, and comprehensive safety features, it stands out as a remarkable choice for those seeking a high-end vehicle that does not compromise on performance or comfort. Whether on the racetrack or the open road, the AXB-232++ promises an exhilarating driving experience defined by precision and style.
Top Page Image Contents