AMX AXB-232++ Setting the DIP Switches, Setting jumper JP5 to set the RS-422 port for RS-485 use

Page 8

Installation and Wiring

Setting jumper JP5 to set the RS-422 port for RS-485 use

1.Disconnect the RS-232/422/485 connectors.

2.Unscrew the two screws on the rear panel, and remove the panel.

3.Slide the circuit board out of the enclosure.

4.Locate the JP5 jumper (see FIG. 3 on page 3).

5.Set jumper JP5 to the ON position (the default setting is OFF).

6.Slide the circuit board back into the enclosure.

7.Replace the panel, and refasten the screws.

8.Reconnect the RS-232/422/485 connectors.

Setting the DIP Switches

Use the DIPSwitch 2.0 application available for free download from AMX to quickly figure out DIP Switch settings for all types of DIP Switches.

Setting the DEVICE DIP switch

Set the device number on DEVICE DIP switch, located on the front of the AXB-232++. The device can be 1 of the 255 devices in an Axcess control system. The device number must match the device assignment in the Axcess program. Device numbers are assigned into the following three segments:

Cards 1 through 95

Boxes 96 through 127

Panels 128 through 255

Set the device number by setting the device DIP switches. The device number is the total of all of the switches in the ON position, and take effect by cycling the power. The following table shows the switch numbers and their corresponding values.

DEVICE DIP Switch Settings

Position

1

2

3

4

5

6

7

8

 

 

 

 

 

 

 

 

 

Value

1

2

4

8

16

32

64

128

 

 

 

 

 

 

 

 

 

 

4

AXB-232++ RS-232/422/485 Interface

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents AXB-232++ Page Table of Contents Table of Contents Rear Panel Product InformationFront Panel Specifications SpecificationsFront Panel Rear PanelSetting jumper JP4 to terminate RS-422 input with 100 ohms Installation and WiringSetting the Internal Jumpers Setting the DIP Switches Setting jumper JP5 to set the RS-422 port for RS-485 useSetting the Device DIP switch Device DIP Switch SettingsSetting the RS-232/422 DIP switch RS-232/422 DIP Switch SettingsSetting FunctionWiring Devices to the AXB-232++ Preparing captive wiresWiring guidelines Using AXlinkUsing RS-232 Using Hardware HandshakingUsing RS-422 Using RS-485Rack-mounting the AXB-232++ optional Replacing the Lithium BatteriesProgramming SendCommandsAXB-232++ SendCommands Sendcommand AXB232,CHARD-10 Sendcommand AXB232,CTSPSHSendcommand AXB232,CTSPSHF Sendcommand AXB232,EOFFAxcess program characteristics SendString Escape Sequences SendString Escape SequencesAXB-232++ Program Statements AXB-232++ Program StatementsXmodem Timing Commands Xmodem Timing CommandsAXlink Master Statements AXlink Master StatementsAxcess Master Mode Reserved ChannelsReserved Channels Channel FunctionRevisionLast09/12/05

AXB-232++ specifications

The AMX AXB-232++ represents a significant advancement in the realm of high-performance vehicles, showcasing cutting-edge technologies and innovative features designed for enthusiasts and professionals alike. This model, known for its robust engineering and sophisticated design, positions itself as a versatile option in the competitive automotive landscape.

One of the standout features of the AMX AXB-232++ is its powerful engine. The vehicle is equipped with a turbocharged inline-six engine capable of producing impressive horsepower and torque, which allows for remarkable acceleration and responsiveness. This performance is further enhanced by the advanced transmission system that offers smooth gear shifts and adaptive performance, ensuring optimal power delivery across various driving conditions.

In terms of design, the AXB-232++ exudes a modern and aerodynamic aesthetic. The vehicle’s exterior incorporates sleek lines and aggressive contours, which not only contribute to its striking appearance but also improve aerodynamics. The dynamic front grille and LED headlamps further emphasize its bold character, while the customizable paint options allow for personalization to reflect the owner’s style.

The interior of the AMX AXB-232++ is equally impressive, combining luxury with functionality. The cockpit is designed with driver-centric ergonomics in mind, featuring high-quality materials and advanced tech integrations. The infotainment system is equipped with a user-friendly interface, providing access to navigation, music, and connectivity features. Premium sound systems and customizable lighting options enhance the overall driving experience.

Safety is a top priority for the AMX AXB-232++, and this model comes equipped with a suite of advanced safety technologies. This includes adaptive cruise control, lane-keeping assist, and a comprehensive airbag system, all designed to enhance driver and passenger safety. Furthermore, the AXB-232++ offers semi-autonomous driving capabilities, showcasing its commitment to incorporating innovative technology in its design.

In summary, the AMX AXB-232++ is a compelling blend of power, luxury, and advanced technology. With its high-performance engine, sophisticated interior, and comprehensive safety features, it stands out as a remarkable choice for those seeking a high-end vehicle that does not compromise on performance or comfort. Whether on the racetrack or the open road, the AXB-232++ promises an exhilarating driving experience defined by precision and style.
Top Page Image Contents