AMX AXB-232++ instruction manual Installation and Wiring, Setting the Internal Jumpers

Page 7

Installation and Wiring

Installation and Wiring

The AXB-232++ can be used as an independent RS-232/422/485-controlled interface by setting the internal jumpers. Configure the communication parameters using the DIP switches on the front panel.

Setting the Internal Jumpers

JP4

Internal jumper JP4

Internal jumper JP5

JP5

front

AXB-232++

FIG. 3 Location of internal jumpers

Setting jumper JP4 to terminate RS-422 input with 100 ohms

Terminating a device involves installing a 100 ohm line terminator, this is typically used to achieve better communication and signal integrity. You will want to terminate when the communication is at a high data rate or over a long distance. Termination can be harmful because it increases the current in the line, and more radiation that could interfere with signals.

Jumper JP4 places 100 Ohms termination across RS422 receive data pins 5 & 6:

1.Disconnect the RS-232/422/485 connectors.

2.Unscrew the two screws on the rear panel, and remove the panel.

3.Slide the circuit board out of the enclosure.

4.Locate the JP4 jumper (FIG. 3).

5.Install the jumper in the 'ON' position (default setting = OFF).

6.Slide the circuit board back into the enclosure.

7.Replace the panel, and refasten the screws.

8.Reconnect the RS-232/422/485 connectors.

AXB-232++ RS-232/422/485 Interface

3

 

 

 

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AXB-232++ Page Table of Contents Table of Contents Front Panel Product InformationRear Panel Rear Panel SpecificationsSpecifications Front PanelSetting the Internal Jumpers Installation and WiringSetting jumper JP4 to terminate RS-422 input with 100 ohms Device DIP Switch Settings Setting the DIP SwitchesSetting jumper JP5 to set the RS-422 port for RS-485 use Setting the Device DIP switchFunction Setting the RS-232/422 DIP switchRS-232/422 DIP Switch Settings SettingUsing AXlink Wiring Devices to the AXB-232++Preparing captive wires Wiring guidelinesUsing RS-485 Using RS-232Using Hardware Handshaking Using RS-422Replacing the Lithium Batteries Rack-mounting the AXB-232++ optionalAXB-232++ SendCommands SendCommandsProgramming Sendcommand AXB232,EOFF Sendcommand AXB232,CHARD-10Sendcommand AXB232,CTSPSH Sendcommand AXB232,CTSPSHFAxcess program characteristics SendString Escape Sequences SendString Escape SequencesAXB-232++ Program Statements AXB-232++ Program StatementsAXlink Master Statements Xmodem Timing CommandsXmodem Timing Commands AXlink Master StatementsChannel Function Axcess Master ModeReserved Channels Reserved ChannelsRevisionLast09/12/05

AXB-232++ specifications

The AMX AXB-232++ represents a significant advancement in the realm of high-performance vehicles, showcasing cutting-edge technologies and innovative features designed for enthusiasts and professionals alike. This model, known for its robust engineering and sophisticated design, positions itself as a versatile option in the competitive automotive landscape.

One of the standout features of the AMX AXB-232++ is its powerful engine. The vehicle is equipped with a turbocharged inline-six engine capable of producing impressive horsepower and torque, which allows for remarkable acceleration and responsiveness. This performance is further enhanced by the advanced transmission system that offers smooth gear shifts and adaptive performance, ensuring optimal power delivery across various driving conditions.

In terms of design, the AXB-232++ exudes a modern and aerodynamic aesthetic. The vehicle’s exterior incorporates sleek lines and aggressive contours, which not only contribute to its striking appearance but also improve aerodynamics. The dynamic front grille and LED headlamps further emphasize its bold character, while the customizable paint options allow for personalization to reflect the owner’s style.

The interior of the AMX AXB-232++ is equally impressive, combining luxury with functionality. The cockpit is designed with driver-centric ergonomics in mind, featuring high-quality materials and advanced tech integrations. The infotainment system is equipped with a user-friendly interface, providing access to navigation, music, and connectivity features. Premium sound systems and customizable lighting options enhance the overall driving experience.

Safety is a top priority for the AMX AXB-232++, and this model comes equipped with a suite of advanced safety technologies. This includes adaptive cruise control, lane-keeping assist, and a comprehensive airbag system, all designed to enhance driver and passenger safety. Furthermore, the AXB-232++ offers semi-autonomous driving capabilities, showcasing its commitment to incorporating innovative technology in its design.

In summary, the AMX AXB-232++ is a compelling blend of power, luxury, and advanced technology. With its high-performance engine, sophisticated interior, and comprehensive safety features, it stands out as a remarkable choice for those seeking a high-end vehicle that does not compromise on performance or comfort. Whether on the racetrack or the open road, the AXB-232++ promises an exhilarating driving experience defined by precision and style.
Top Page Image Contents