AMX Octaire instruction manual Customizing the Site Name, To customize the site name

Page 79

APWeb – Initial Setup by Network Admin

Customizing the Site

The APWeb site can be customized in several different ways: This section covers customizing the site name, access to product services, and bootup operations. Customizing the control options is covered in the next section (see page 76).

Customizing the Site Name

The site name for the APWeb server can be customized at the APWeb Configuration page. Customizing the site name can be especially useful when accessing multiple AMX AutoPatch Routing Systems from multiple APWeb servers on one PC.

To customize the site name:

1.From any page in the site, click the Configuration link.

2.Under Set APWeb Site Name, enter the new name (36 character limit).

3.Click Apply. The new name appears at the top of all the pages within APWeb.

Enabling/Disabling Product Services

APWeb can be customized for additional access to the system with Telnet and/or BCS tunnel. They can be enabled or disabled from the APWeb Administration page. The default for both is on.

Account Profile / Site Security

Enable / Disable Product Services

FIG. 38 APWeb Administration

Note: The Administration page also provides access to the Account Profile / Site Security page (see page 71).

To enable or disable product services:

1.From any page in the site, click the Administration link.

2.Select the means of access (see below), and click Apply. A prompt to reboot appears.

3.Click OK. (A reboot is required to implement the changes.)

Telnet – check this option to be able to open a Telnet client application, such as HyperTerminal, to access and control the system. This option must be enabled before establishing a Telnet session with APWeb. If this option is turned off, the Launch Telnet Session button will not be available on the Diagnostics page.

74

Octaire Instruction Manual

Image 79
Contents Octaire AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Contents APWeb Controlling the Octaire ESD Warning Important Safety Information & Instructions Information et directives de sécurité importantes Lithium Batteries Notice Copyright NoticeLiability Notice Usfcc NoticeTrademark Notices Page Applicability Notice Overview & General SpecificationsComposite Video and Composite Video+Stereo Component and Component+Stereo Y/c+StereoEnclosures Product NotesRgbhv and RGBHV+Stereo StereoOctaire Control Features Octaire FeaturesRear View Front ViewRear View Components Control Hardware Power Receptacles & SwitchesSerial Number Input & Output Connectors General SpecificationsBCS Serial Control Protocol External Control OptionsNetLinx Control SoftwareGeneral Hazard Precautions Installation & SetupSite Recommendations Reliable Earthing Grounding UnpackingMechanical Rack Loading Circuit OverloadingInstallation Recommendations Rack Installation & System SetupRequired items for rack installation Optional items for rack installationAttach rack ears To install and set up an Octaire system in a rackLink Cable Requirements Additional Installation OptionsCrossover Cable Specifications Linking EnclosuresLinking Three or More Octaire Enclosures To link two Octaire enclosuresTo link three or more Octaire enclosures Attaching Inputs & Outputs Link Connector LEDsCabling Video Connectors Signal Type Labels on EnclosuresConnecting Video Cables Installing Color Bands for Signal TypesTo connect video inputs and outputs To attach stereo audio input and output wires Wiring Stereo Audio Connectors 5-position terminal blockWiring Sources & Destinations Attaching WiresAttaching External Control PC Requirements for APControl Connecting Serial ControllersConnecting an External Serial Controller RS-232 Pin DiagramTo establish external serial control Serial Communication SettingsComplete Power Redundancy Setup Applying Power & StartupPower-Up Sequence To apply power Octaire LED Indicators Indicator Lights at StartupNetLinx Compatible Control Panel StartupAPWeb Startup Serial Control Device StartupAPControl 3.0 or APWeb Executing a Test SwitchBCS Commands Control PanelAMX Contact Information To execute the test switchTroubleshooting Technical SupportCabling a Multi-Enclosure System for VIS Cabling & Setup for Vertical Interval SyncTo send the sync signal to a multi-enclosure System Cable Requirement for VISPrimary Enclosure VIS Toggle SwitchesSecondary Enclosures To set the VIS toggle switchesTCP/IP Port & Indicator LEDs Connecting to the APWeb ServerAPWeb System Setup Service Switch SVCCable Requirements To connect the Octaire system to a LAN or to a PC Fasten the Ethernet link connectorInstallation & Setup Standard Video Signal Types & SpecificationsVideo Signals Video TypesSync Ultra-Wideband VideoStereo Audio Stereo Audio SignalsSignal Types & Specifications Overview Octaire Control Panel OperationControl Keys & Dial Input & Output Keys Take KeyChange Menus & ModesLabeling Input & Output Keys To create and install labels for Input and Output KeysTo execute a test switch Executing SwitchesTo change the virtual matrix routing level Changing Virtual Matrices Routing LevelsTo disconnect inputs and outputs Disconnecting SwitchesTo verify the status of a signal Verifying Signal StatusDefining Global Presets Defining & Executing Global PresetsTo define a global preset Executing Global Presets To execute a global preset Adjusting Output Volume To adjust the volume Adjusting AudioMuting & Un-muting Outputs To mute an output Example of muted output in Output Volume ModeAdjusting Input Gain To un-mute an output while in Mute ModeTo adjust input gain Current gain setting Gain range Locking the Control Panel Locking & UnlockingTo lock the Control Panel To unlock the Control Panel Unlocking the Control PanelSoftware Version Setup OptionsTo check the software version information To change the default virtual matrix routing level Default Virtual MatrixTo enable VIS Vertical Interval Sync VIS ConfigTo set the password Setting the PasswordOctaire Control Panel Operation To enable error code reporting System Error Codes & TroubleshootingTo turn off error code reporting Troubleshooting Octaire Control Panel Operation APWeb Initial Setup by Network Admin Design Requirement To set up the APWeb serverOpening the APWeb Server System RequirementsLink Function Overview of the Admin HomeTo force invocation of a Dhcp IP address Setting a Static IP AddressUsing a Dhcp IP Address Optional To enter a static IP addressDefault User Name & Password Setting Admin & User Account LoginsTo set the User and Admin Account Logins To execute a test switch with the XBar Executing a Test Switch with the XBarTo disconnect the test switch To send a test BCS command Executing a Test Switch with BCSCustomizing the Site Name Enabling/Disabling Product ServicesTo enable or disable product services Customizing the SiteTo customize bootup operations Customizing Bootup OperationsBootup Operations Options Enabling Audio Control Setting the Size of the XBar WindowSetting the Initial VM to Display Customizing the Control OptionsExamples Creating / Editing MacrosTo delete a macro Defining Routing Levels Manually Configuring VMsTo redefine the contents of an existing macro To create a macroTo manually define a routing level VM VM Numbering RulesTo delete an existing routing level VM To turn system security off Handling Security IssuesResetting the User Name & Password Turning System Security OffOpening a Telnet Session To reset the user name and password to their default valuesTo open a Telnet session Executing & Disconnecting Switches on the XBar Executing & Disconnecting SwitchesNavigating the XBar Controller Adjusting Volume Adjusting Audio SettingsTo execute or disconnect switches To update system status when using multiple control pointsAdjusting Input Gain To execute a macro Executing MacrosAPWeb Connection Information Worksheet Login Names RequiredAPWeb Controlling the Octaire Connecting to APWebTo connect to the APWeb server Home Page Links HomeXBar Controller Overview Navigating the XBar Controller To execute or disconnect switches with the XBarAdjusting Volume Updating Status on the XBar Embedding the XBar Applet APWeb Additional Info for Network AdminXBar Applet Tag To add an exception to the proxy setting information Changing the Proxy SettingBe sure Proxy server box is checked Click Advanced Proxy Settings dialog box opens Appendix a Octaire AutoPatch Connector Guide System Component Information Appendix B Programmer’s Interface for System DiagnosticsTo access the lowest level of verbosity for all components Verbosity SettingsComponent Settings General Rules for Octaire Diagnostic CommandsDisplay for i7v1 component 7, verbosity Splash Screen ExamplesAppendix B Programmer’s Interface for System Diagnostics 100 It’s Your World Take Control

Octaire specifications

The AMX Octaire is a remarkable aircraft designed to meet the evolving demands of modern aviation. Renowned for its combination of advanced technology, efficiency, and versatility, the Octaire stands out in the realm of business jets and regional transport.

One of the main features of the AMX Octaire is its sleek aerodynamic design, which not only enhances aesthetics but significantly contributes to fuel efficiency. The aircraft's fuselage is built using advanced composite materials, which reduce weight while maintaining structural integrity. This results in improved performance and operational costs, making the Octaire an attractive option for companies and individuals seeking economical flying solutions.

Powered by two state-of-the-art turbofan engines, the AMX Octaire is capable of reaching an impressive cruising speed while optimizing fuel consumption. These engines are equipped with next-generation noise reduction technologies that conform to stringent environmental regulations, minimizing the aircraft's carbon footprint and contributing to sustainable aviation practices.

The cockpit of the Octaire features cutting-edge avionics, including multifunction displays and an intuitive interface for pilots. This technology enhances situational awareness and simplifies navigation, allowing for a smoother flight experience. The integration of fly-by-wire controls ensures precision handling and improved safety, making the Octaire a reliable choice for both seasoned pilots and newcomers.

Passenger comfort is a top priority in the design of the AMX Octaire. The cabin is spacious and customizable, featuring luxurious seating arrangements, modern entertainment systems, and advanced climate control. High-capacity windows provide ample natural light, creating an inviting atmosphere that enhances the onboard experience. With soundproofing materials expertly incorporated into the design, passengers can enjoy a serene environment during their journeys.

Versatility is another hallmark of the AMX Octaire. It can be adapted for various roles, including business travel, medevac missions, and cargo transport. This flexibility ensures that the Octaire can meet the needs of a diverse clientele, from corporate executives to humanitarian organizations.

In summary, the AMX Octaire is a sophisticated aircraft that embodies efficiency, comfort, and technological advancement. Its design and features position it as a leader in the aviation market, promising to deliver exceptional performance for years to come. Whether used for business or specialized operations, the Octaire is poised to redefine expectations in air travel.